GB/T 29839-2013Optical fiber composite low-voltage cable for rated voltages up to and including 1kV(Um=1.2kV) (English PDF)

1 Scope

This standard specifies the optical fiber composite low voltage cable product code, specifications, models and marking, materials, technical requirements, marking, delivery length,

Testing, inspection rules, packaging, transport and storage.

This standard applies to the rated voltage 0.6/1kV and below the optical fiber composite low voltage cable.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein

Member. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 156 standard voltage

GB/T 2951.11-2008 and optical cables - Common test methods for insulating and sheathing materials Part 11. General test method

Measurement of thickness and overall dimensions of mechanical tests

GB/T 3048.9-2007 electrical wire and cable performance test methods - Part 9. spark test of insulated cores

GB/T 3048.10-2007 wire and cable electrical performance test methods - Part 10. extruded sheath spark test

GB/T 3956-2008 conductor cable

GB/T 6995.2 wire and cable identification methods - Part 2. Standard colors

GB/T 6995.3 wire and cable identification - Part 3. Wire and cable identification

GB/T 6995.5 wire and cable identification method - Part 5. Power cable insulation Core identification mark

Basic optical cable test methods. Part 2 GB/T 7424.2-2008 total cable specification

GB/T 9771 (all parts) series single-mode fiber communication

GB/T 12357 (all parts) multimode fiber communications

GB/T 12706.1-2008 rated voltage 1kV (Um = 1.2kV) to 35kV (Um = 40.5kV) extruded insulation power cable

And accessories - Part 1. Rated voltage 1kV (Um = 1.2kV) and 3kV (Um = 3.6kV) cable

GB/T 15972 (all parts) -2008 optical fiber test methods

GB/T 19666 retardant and fire-resistant wire and cable General

JB/T 8137 (all parts) wire and cable delivery plate

YD/T 979 with fiber optic technology requirements and test methods

YD/T 1118 (all parts) optical fiber secondary coating material

YD/T 1954 access network with a bending loss insensitive single mode optical fiber characteristic

3 Terms and Definitions

The following terms and definitions apply to this document.