GB/T 29634-2013General specification for permanent magnetic DC gearmotor using on electric wheelchairs (English PDF)
电动轮椅车用永磁直流齿轮减速电动机构通用技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 29634-2013 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
July 19, 2013
Implementation date
November 1, 2013
Scope
GB/T 29634-2013 is the English-translated version of 电动轮椅车用永磁直流齿轮减速电动机构通用技术条件.
GB/T 29634-2013 is the Chinese standard "General specification for permanent magnetic DC gearmotor using on electric wheelchairs".
Its scope clause reads: This standard specifies the electric wheelchair with permanent magnet DC gear motor drive unit (hereinafter referred to as the motor drive unit) terms and definitions, structures Type, operating and test conditions, technical requirements and test methods, inspection rules, ready to be delivered.
This standard applies to electric wheelchairs permanent magnet DC gear motor mechanism. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 29634-2013
National Standard of the People's Republic of China
- ICS
- 11.180
- Classification
- K 23
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 3.1 Clutch
1 Scope
This standard specifies the electric wheelchair with permanent magnet DC gear motor drive unit (hereinafter referred to as the motor drive unit) terms and definitions, structures
Type, operating and test conditions, technical requirements and test methods, inspection rules, ready to be delivered.
This standard applies to electric wheelchairs permanent magnet DC gear motor mechanism.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 1993 rotary motor cooling
GB/T 2423.3 electric and electronic products environmental testing procedures Test Ca. Damp heat test method
GB/T 2423.10 Environmental testing for electric and electronic products Part 2. Test methods - Test Fc and guidance. Vibration (sinusoidal)
GB/T 2423.17 electric and electronic products environmental testing procedures Test Ka. Salt mist
GB/T 2423.22 Environmental testing for electric and electronic products Part 2. Test methods - Test N. Temperature change
GB/T 2423.37-2006 Environmental testing for electric and electronic products Part 2. Test methods - Test L. Dust Test
GB/T 2423.38-2005 Environmental testing for electric and electronic products Part 2. Test methods Test R. Water test method and
Guidelines
GB/T 2828.1-2003 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch test sample plan
GB/T 4857.5 Transport Packaging drop test method
GB/T 4857.7 Packaging Transport basic test - Part 7. Test method for fixed-frequency sinusoidal vibration
GB/T 4857.11 Transport Packaging - Basic tests - Part 11. Horizontal impact test method
GB/T 4942.1 entire structure of the rotary motor degree of protection (IP) rating
GB/T 6544 corrugated board
GB/T 6656-2008 ferrite permanent magnet DC motor
GB/T 10069.1 rotating electrical machines - Part 1 Noise measurement methods and limits. rotary motor noise measurement method
GB/T 12339 with protective packaging materials
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1 Clutch
The electromagnetic brake brake disengaged manually or gearbox output shaft gear meshing disengagement means.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 29634-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 29634-2013
$255.00