Valid

GB/T 29597-2013Reactive dyes - Determination of stability to alkalis (English PDF)

反应染料 耐碱稳定性的测定

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 29597-2013 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

July 19, 2013

Implementation date

December 1, 2013

Scope

GB/T 29597-2013 is the English-translated version of 反应染料 耐碱稳定性的测定.

GB/T 29597-2013 is the Chinese standard "Reactive dyes - Determination of stability to alkalis". Its scope clause reads: This standard specifies the reaction of alkali dye stability and salt - Determination of base stability.

This standard applies to stability and salt dyes alkali reaction - Determination of alkaline stability. Its clauses include equipment and materials; test procedure.

Found what you need?

Document preview — GB/T 29597-2013

National Standard of the People's Republic of China

ICS
71.100.01
Classification
G 55

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope
  • 2 Normative references
  • 4 Equipment and Materials
  • 5 test procedure

1 Scope

This standard specifies the reaction of alkali dye stability and salt - Determination of base stability.

This standard applies to stability and salt dyes alkali reaction - Determination of alkaline stability.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein

Member. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 1914-2007 Chemical analysis filter paper

General conditions GB/T 2374-2007 Determination of dyes provisions

GB/T 6682-2008 analytical laboratory use specifications and test methods (ISO 3696. 1987, MOD)

Principle 3

A certain concentration of reactive dye solution at a certain concentration of alkali - under (alkali) the role of the dye will produce condensation and precipitation. By measuring

Dye base (salt - base) deposition time to evaluate the alkali solution (salt - alkali) stability.

4 Equipment and Materials

Reagents, equipment and materials shall comply with the relevant provisions of GB 2374-2007/T; test water should comply with GB/T 6682-2008 in

Three water regulations.

4.1

Magnetic stirrer speed (500 ~ 600) r/min, stirring rod specifications 40mm × phi6mm.

4.2

balance, a sense of the amount of 0.01g.

4.3

filter, in line with GB/T 1914-2007, medium-speed qualitative filter paper.

4.4

sodium carbonate solution, 200g/L.

4.5 mixed alkali solution

per liter of solution containing sodium hydroxide 120g, sodium silicate (Na2SiO3 · 9H2O) 200g.

4.6

over anhydrous sodium sulfate.

5 test procedure

5.1 Determination of alkali stability

Sample of dye was weighed 10g (accurate to 0.01g) in 150mL beaker, was added 90mL of water, stirred and dissolved, adjusting the solution temperature (25 ±

2) °C. The solution was placed on a magnetic stirrer, a stir bar, start stirring, stirring speed 500r/min ~ 600r/min. Added under stirring

The mixed alkali solution 10mL, start the chronograph. Mixed alkali addition was completed after spotting observed after every 5min sampling time, each sample 1 drop points

On filter paper, filter paper to observe whether there is infiltration ring dye deposited. If the dye has precipitated, the precipitated dye recording the first time, as the alkali stability.

If you have not 120min dye precipitated the end of the experiment, in terms of alkali stability > 120min.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 29597-2013

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 29597-2013

$75.00