GB/T 29549.3-2013Specification for offshore modular drillling rigs on fixed platforms - Part 3: Hook-up,commissioning,and acceptance (English PDF)
海上石油固定平台模块钻机 第3部分：海上安装、调试与验收
This is a limited preview
Buy now to download the full PDF (21 pages)
Need quotation for your management?
Get a formal quotation for GB/T 29549.3-2013 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
June 9, 2013
Implementation date
January 1, 2014
Scope
GB/T 29549.3-2013 is the English-translated version of 海上石油固定平台模块钻机 第3部分：海上安装、调试与验收.
GB/T 29549.3-2013 is the Chinese standard "Specification for offshore modular drillling rigs on fixed platforms - Part 3: Hook-up,commissioning,and acceptance".
Its scope clause reads: This section GB/T 29549 requirements for lifting offshore fixed platforms offshore oil rig module (hereinafter referred to as module rigs), and Offshore installation connected to the system, system testing and commissioning requirements.
This section applies to offshore drilling rig module installation, commissioning and acceptance. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 29549.3-2013
National Standard of the People's Republic of China
- ICS
- 75.180.10
- Classification
- E 92
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4.2 job site preparation
- 4.3 lifting operations
- 5 offshore equipment installation and system connection
- 5.2 Technical Requirements
- 6 3 system debugging
- 6.1 Basic requirements
- 6.3 Debugging Content
- 6.4 Requirements for commissioning
- 7 Acceptance
- 10 7.1 Site Acceptance
- 7.2 Acceptance documents
- Appendix A (informative) module lifting rig, commissioning work safety risk analysis unit
- Annex B (informative) module rigs offshore installation content
- Annex C (informative) Offshore rig module connection order and content
- Annex D (informative) fixed offshore platform module rig inspection reports
- Annex E (informative) fixed offshore platform module rigs final acceptance documents and records
- References
1 Scope
This section GB/T 29549 requirements for lifting offshore fixed platforms offshore oil rig module (hereinafter referred to as module rigs), and
Offshore installation connected to the system, system testing and commissioning requirements.
This section applies to offshore drilling rig module installation, commissioning and acceptance.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB 4914 offshore oil exploration and development of pollutant emission concentration limits
GB/T 8423 oil drilling equipment and specialized vocabulary pipe
GB/T 17744-2008 Petroleum and natural gas industries - Drilling and workover equipment
GB/T 20660 Fire oil and gas industry offshore production facilities, explosion control, reduction measures - Requirements and guidelines
GB/T 23722 crane drivers (operators), slingers qualifications, command staff and assessors requirements
GB/T 29549.1-2013 fixed offshore oil rig Platform Module - Part 1. Design
GB/T 29549.2-2013 fixed offshore oil rig Platform Module - Part 2. Construction
SY/T 5244 drilling fluid circulation manifold
SY/T 5964 drilling well control device assembly supporting installation and maintenance
SY/T 10010 Non-Classified regional level I and Class 1 and Class 2 electrical systems design area of fixed and floating offshore oil facilities and
Recommended practice for installation
SY/T 10025 offshore drilling unit operations before inspection code
Offshore Oil Safety Management Regulations (State Administration of Work Safety Order No. 25 December 1, 2009)
Fixed offshore platform safety regulations (State Economic and Trade Commission in September 2000)
The International Convention for the Safety of Life at Sea (IMO)
3 Terms and Definitions
GB/T 8423, GB/T 29549.1, GB/T 29549.2 defined and the following terms and definitions apply to this document.
3.1 Offshore Lifting hookupandinstalation
Each module rig in accordance with the overall design layout and construction requirements for lifting the order and fixed installation process.
3.2 Lifting beam
Hoisting crane load balancing tool for the construction work.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 21 pages — is available in the English PDF.
Similar standards
How to Download GB/T 29549.3-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 29549.2-2013 — Specifications for offshore modular drilling rigs on fixed platforms - Part 2: Construction
GB/T 29549.1-2023 — Specification for offshore modular drilling rigs on fixed platforms—Part 1: Design
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
Secure payment via Stripe
Payments accepted
GB/T 29549.3-2013
$375.00