Valid

GB/T 29549.2-2013Specifications for offshore modular drilling rigs on fixed platforms - Part 2: Construction (English PDF)

海上石油固定平台模块钻机第2部分：建造

Preview PDF

This is a limited preview

Buy now to download the full PDF (25 pages)

Need quotation for your management?

Get a formal quotation for GB/T 29549.2-2013 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

June 9, 2013

Implementation date

January 1, 2014

Scope

GB/T 29549.2-2013 is the English-translated version of 海上石油固定平台模块钻机第2部分：建造.

GB/T 29549.2-2013 is the Chinese standard "Specifications for offshore modular drilling rigs on fixed platforms - Part 2: Construction".

Its scope clause reads: This part of GB/T 29549 specifies the structure, piping and outfitting of offshore drilling rigs (hereinafter referred to as module rigs) Installation and equipment installation and commissioning requirements.

This section applies to land construction of module rigs. Its clauses include normative reference documents; terms, definitions and abbreviations.

Found what you need?

Document preview — GB/T 29549.2-2013

National Standard of the People's Republic of China

ICS: 75.180.10
Classification: E 92

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Preface
1 Scope
2 normative reference document
3 terms, definitions and abbreviations
3.1 Terms and definitions
3.2 Abbreviations
4 basic requirements
4.1 Submission and approval of construction documents
4.2 Inspection, storage and traceability of materials and equipment
5 module structure
5.1 Construction site
5.2 prefabricated steel structure
5.3 Overall assembly
5.4 Welding
5.5 Welding inspection
6 module pipeline prefabrication and installation
6.1 Pipeline Prefabrication
6.2 Pipeline installation
6.3 Pressure test
6.4 Pipeline purge and cleaning
7 module outfitting construction
7.1 Installation
7.2 Quality inspection
8 module corrosion
8.1 Surface treatment
8.2 Painting Construction
9.1 Installation of equipment
9.2 Equipment commissioning
10 module weighing, loading and fixing
10.1 Weighing
10.2 Shipping Method Selection
10.3 Submission and Approval of Shipping Documents
10.4 Loading and fixing
Appendix A (informative) Typical quality assurance and control documents
Appendix B (Informative Annex) List of Typical Construction Design Documents
Appendix C (informative) Typical DES build assembly flow chart
Appendix D (informative) Typical DSM build assembly flow chart
Appendix E (informative) Typical shipments and fixed design documents

1 Scope

This part of GB/T 29549 specifies the structure, piping and outfitting of offshore drilling rigs (hereinafter referred to as module rigs)

Installation and equipment installation and commissioning requirements.

This section applies to land construction of module rigs.

2 normative reference documents

The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article

Pieces. For undated references, the latest edition (including all modifications) applies to this document.

GB 7691 Painting Operation Safety Code Safety Management General

Oil Drilling Equipment and Special Pipe Vocabulary

GB/T 8923 steel surface corrosion grade and rust level before painting

GB/T 13288 Surface treatment of steel coated with coatings - Surface roughness characteristics of steel after spray treatment - Part 1.

Technical requirements and definitions of ISO surface roughness comparison of steel surface roughness after jet cleaning

Code for construction and acceptance of automatic fire alarm system GB 50166

Offshore oil rigs - Module rigs - Part 1. Design

Specification for Pretreatment of Steel Surface Pretension on SY/T 0407

Specification for solid - phase control equipment for SY/T 5612 oil drilling fluids

Installation and commissioning of SY/T 5964 drilling well control device

SY/T 6223 drilling fluid purification equipment supporting, installation, use and maintenance

SY/T 6416 Recommended method for installation, maintenance and operation of internal combustion engines

SY/T 6461 Recommended installation and operation of wet steam generators

Installation and Inspection of SY/T 6586 Oil Drilling Rig

Specification for manufacture of SY/T 10002 structural steel pipes

CORROSION CONTROL OF STEEL STAINLED PETROLEUM PRODUCTION STRUCTURES AT MARINE SY/T 10010 Design of electrical systems for fixed and floating offshore oil installations in nonclustered and Class I and Category 2 areas

Install recommended practice

SY/T 10030 Recommended practice for planning, designing and constructing offshore fixed platforms Working stress design method

SY/T 10042 Recommended practice for piping system design and installation at offshore production platforms

YB3301 welded H-beam

3 terms, definitions and abbreviations

GB/T 8423 and GB/T 29549.1 and the following terms, definitions and abbreviations apply to this document.

3.1 Terms and definitions

3.1.1 Main component primarymember

The main components that affect the overall integrity of the rig structure, such as deck girders, deck main trusses, slide girders, slide rails and so on.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 25 pages — is available in the English PDF.

Similar standards

GB/T 17389-2026|GB/T 29169-2026|GB/T 47273-2026|GB/T 47376-2026|GB/T 47807-2026|GB/T 17386-2025

How to Download GB/T 29549.2-2013

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.