GB/T 29542-2013Industrial off-gas energy recovery turbine expander (English PDF)
工业尾气能量回收透平膨胀机
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 29542-2013 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
June 9, 2013
Implementation date
January 1, 2014
Scope
GB/T 29542-2013 is the English-translated version of 工业尾气能量回收透平膨胀机.
GB/T 29542-2013 is the Chinese standard "Industrial off-gas energy recovery turbine expander".
Its scope clause reads: This standard specifies the basic design of industrial exhaust gas turbo-expander, coupling and guard, control and instrumentation, inspection and testing, assurance, Tu Installation and minimum requirements for the packaging and transport.
This standard applies to industrial axial-flow exhaust energy recovery turbo-expander (hereinafter referred to as "expander"). Its clauses include terms.
Found what you need?
Document preview — GB/T 29542-2013
National Standard of the People's Republic of China
- ICS
- 23.140
- Classification
- J 72
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms
- 3.1 Industrial exhaust gas (for example
- 3.2 Operating speed workingspeed
- 3.3 Minimum continuous operating speed
- 3.4 Maximum continuous operating speed
1 Scope
This standard specifies the basic design of industrial exhaust gas turbo-expander, coupling and guard, control and instrumentation, inspection and testing, assurance, Tu
Installation and minimum requirements for the packaging and transport.
This standard applies to industrial axial-flow exhaust energy recovery turbo-expander (hereinafter referred to as "expander").
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 191 Packaging - Pictorial signs
GB/T 2100 corrosion resistant steel castings for general purposes
GB/T 3766 Hydraulic System General technical conditions
GB/T 6557 flexible rotor balancing mechanical methods and guidelines
GB/T 9239.1 Mechanical vibration steady state (rigid) rotor balance quality requirements - Part 1. Specification and balance tolerance test
GB/T 11345 steel welds manual ultrasonic testing and classification of testing results
GB/T 12467.3 quality welding of metallic materials - Part 3. General quality requirements
GB/T 13306 signs
GB/T 26137 blast furnace gas energy recovery turbo-expander Thermal Performance Test
JB/T 4365 special lubrication, shaft sealing and control oil system
JB/T 6887 Technical condition for cast iron fan
3 Terms
The following terms and definitions apply to this document.
3.1 Industrial exhaust gas (for example
pyrolysis gas, gas nitric acid, etc.) expansion of the thermal energy into mechanical energy of the turbine machinery.
3.2 Operating speed workingspeed
nr
Speed design conditions in the expander power output shaft.
3.3 Minimum continuous operating speed
nmin
Expander rotor allows continuous operation minimum speed (r/min) within the specified operating range.
3.4 Maximum continuous operating speed
nmax […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 29542-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 29542-2013
$195.00