GB/T 29494-2013Small vertical axis wind turbines (English PDF)
小型垂直轴风力发电机组
This is a limited preview
Buy now to download the full PDF (30 pages)
Need quotation for your management?
Get a formal quotation for GB/T 29494-2013 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
March 20, 2013
Implementation date
October 1, 2013
Scope
GB/T 29494-2013 is the English-translated version of 小型垂直轴风力发电机组.
GB/T 29494-2013 is the Chinese standard "Small vertical axis wind turbines".
Its scope clause reads: This standard specifies the small vertical axis wind turbine (referred to as a vertical axis wind turbine) terms and definitions, the main structure shape Type and parameters, technical requirements, test methods, installation requirements, labeling, packaging, transportation and storage.
This standard applies to rotor swept area of \u200b\u200bless than 200m2 and the output voltage is less than 1000V ac or 1500V dc less than the vertical Axis wind turbine. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 29494-2013
National Standard of the People's Republic of China
- ICS
- 27.180
- Classification
- F 11
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 3 Technical requirements
- 5 Test
- 6 Appearance Protection
- 7 Transport and storage is
- 8 Assembly and installation
- 9 Operation and Maintenance
- 11 documents
- Appendix A (normative) concerning references GB/T 18451.2-2012 extra during execution of instructions
- Annex B (informative) vertical axis wind turbine load Simple calculation model
- References
1 Scope
This standard specifies the small vertical axis wind turbine (referred to as a vertical axis wind turbine) terms and definitions, the main structure shape
Type and parameters, technical requirements, test methods, installation requirements, labeling, packaging, transportation and storage.
This standard applies to rotor swept area of less than 200m2 and the output voltage is less than 1000V ac or 1500V dc less than the vertical
Axis wind turbine.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB 755-2008 rotating motor fixed and performance
GB/T 2900.53 Electrotechnical terminology Wind Turbine
GB 5226.1-2008 Safety of machinery - Electrical machinery and electrical equipment - Part 1. General requirements
GB 16895.3 Electrical installations of buildings - Part 5-54. Selection and erection of electrical equipment - Earthing arrangements, protective conductors and Paul
Bonding conductor protection
GB/T 17646-2013 requirements for small wind turbine design
GB 17799.1 Electromagnetic compatibility - Generic standards for residential, commercial and light industrial environment - Immunity
GB 17799.3 Electromagnetic compatibility - Generic standards for residential, commercial and light industrial environments Emission standard
GB/T 18451.2-2012 wind turbine power performance testing
GB/T 22516-2008 wind turbine noise measurement method
GB /Z25426-2010 wind turbine mechanical load measurement
GB /Z25427-2010 wind turbine lightning protection
General requirements GB/T 27025-2008 testing and calibration laboratories
GB 50009-2001 structural load specifications
IEC 62103.2003 Electrical Installations electronic device (Electronicequipmentforuseinpowerinstalations)
3 Terms and Definitions
GB/T 2900.53 define the following terms and definitions apply to this document.
3.1 Wind turbine rotor
Vertical axis wind turbines convert wind energy into mechanical energy of the main unit, by the blades, blade connection, the rotor shaft composed of three parts.
Some places blade design and is directly connected to the rotor shaft. Figure 1 several typical vertical axis wind turbine blade design patterns classified according to species
Sketch, but this standard is not limited to these designs.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 30 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 29494-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 29494-2013
$525.00