GB/T 29338-2012Production technical regulation for phosphoric acid(wet-process) (English PDF)
磷酸(湿法)生产技术规范
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 29338-2012 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 31, 2012
Implementation date
August 1, 2013
Scope
GB/T 29338-2012 is the English-translated version of 磷酸(湿法)生产技术规范.
GB/T 29338-2012 is the Chinese standard "Production technical regulation for phosphoric acid(wet-process)".
Its scope clause reads: standard specifies the phosphoric acid (wet) basic requirements for manufacturers, phosphoric acid (wet) the principle of production, production process control, production equipment maintenance Care and maintenance, product quality requirements, the production of safe handling precautions, emission limits, sampling and data collection and monitoring of pollutants measured method.
This standard applies to existing, new construction, expansion, renovation and implementation of technical transformation project phosphoric acid (wet) manufacturers. phosphoric acid (wet) Construction, shall comply with this standard, it should also comply with the relevant engineering quality, safety, occupational health, fire and other parties From mandatory standard provisions surfaces. Its clauses include terms.
Found what you need?
Document preview — GB/T 29338-2012
National Standard of the People's Republic of China
- ICS
- 71.020
- Classification
- G 01
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms
- 3.1 Phosphoric acid (wet) phosphoricacid (wet-process)
- 3.2 Dihydrate dihydrateAct
- 3.3 Semi Water Act water-halfAct
- 3.4 Half water - dihydrate semi-water-dihydrateAct
1 Scope
1.1
standard specifies the phosphoric acid (wet) basic requirements for manufacturers, phosphoric acid (wet) the principle of production, production process control, production equipment maintenance
Care and maintenance, product quality requirements, the production of safe handling precautions, emission limits, sampling and data collection and monitoring of pollutants measured method.
This standard applies to existing, new construction, expansion, renovation and implementation of technical transformation project phosphoric acid (wet) manufacturers.
1.2
phosphoric acid (wet) Construction, shall comply with this standard, it should also comply with the relevant engineering quality, safety, occupational health, fire and other parties
From mandatory standard provisions surfaces.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 2589 General Principles of comprehensive energy consumption calculation
GB 3095 Ambient Air Quality Standard
GB 15580 fertilizer industrial water pollutant discharge standards
GB/T 16157 Stationary source emission-Determination of particulates and gaseous pollutants sampling methods
GB 16297 Air Pollutant Emission Standards
GB 18599 general industrial solid waste storage and disposal site pollution control standards
HG/T 4068 Industrial wet crude phosphoric acid
HG/T 4069 Industrial wet phosphoric acid purification
HJ/T 397 stationary source emission monitoring and technical specifications
3 Terms
The following terms and definitions apply to this document.
3.1 Phosphoric acid (wet) phosphoricacid (wet-process)
Usually it refers to the direct reaction with sulfuric acid, phosphoric acid and phosphate formed.
3.2 Dihydrate dihydrateAct
Sulfuric acid and phosphate rock to produce phosphoric acid and calcium sulphate dihydrate crystals production methods.
3.3 Semi Water Act water-halfAct
Sulfuric acid and phosphate rock to produce phosphoric acid and calcium sulfate hemihydrate crystallization production methods.
3.4 Half water - dihydrate semi-water-dihydrateAct
Sulfuric acid and phosphate rock, phosphoric acid and half water into Mr. calcium sulfate crystallization, hydrated calcium sulfate dihydrate crystals production methods.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 29338-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 29338-2012
$255.00