GB/T 29294-2012Performance requirements for LED downlights (English PDF)
LED筒灯性能要求
This is a limited preview
Buy now to download the full PDF (18 pages)
Need quotation for your management?
Get a formal quotation for GB/T 29294-2012 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 31, 2012
Implementation date
September 1, 2013
Scope
GB/T 29294-2012 is the English-translated version of LED筒灯性能要求.
GB/T 29294-2012 is the Chinese standard "Performance requirements for LED downlights". Its scope clause reads: This standard specifies the LED light source, the power supply voltage not exceeding 250V general lighting LED downlight performance requirements.
This standard does not include the use of integrated LED lights downlight. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 29294-2012
National Standard of the People's Republic of China
- ICS
- 29.140.50
- Classification
- K 72
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 2 Normative references1
- 3 Terms and definitions1
- 4.1 according to the light exit surface shape classification5
- 4.3 Classification according to caliber5
- 4.5 Press the LED light source of the type of classification5
- 6.1 General6
- 6.2 Series or unit6
- 6.3 Number of samples6
- 6.4 Lamps member6
- 7.1 Electrical Properties6
- 7.2 photometric performance7
- 7.4 chroma9
- 7.5 Structural requirements10
- 7.6 Thermal Test11
- 7.7 Reliability11
- 7.8 low temperature suitability11
- 8 mark12
- 8.2 Additional content12
- Appendix A (Informative Appendix) LED lamp type14
- Annex B (informative) downlights Port size Metric - Imperial table15
- Appendix C (normative) C luminaire photometric plane coordinate system16
- Annex D (informative) than from indoor lamps17
- Appendix E (Informative Appendix) VDT application environment and brightness limits18
- References19
1 Scope
This standard specifies the LED light source, the power supply voltage not exceeding 250V general lighting LED downlight performance requirements.
This standard does not include the use of integrated LED lights downlight.
2 Normative references
The following documents for the application of this document is essential. For cited documents with dates, only the dated edition applies to this document. For undated references, the latest edition (including any amendments) applies to this document.
GB7000.1-2007 lamps - Part 1. General requirements and tests (IEC60598-1.2003, IDT)
Section 14 GB19510.14-2009 control Lamp. LED module for dc or ac Particular requirements for electronic control unit (IEC61347-2-13.2006, IDT)
GB24819-2009 LED modules for general lighting - Safety requirements (IEC62031.2008, IDT)
GB/T24825 LED module with AC or DC electronic control device performance requirements (GB/T24825-2009, IEC62384.2006, MOD)
GB/T29293-2012 LED downlight performance measurement
EN12464-1.2011 light lighting workplace lighting - Part 1. Indoor workplaces
3 Terms and Definitions
GB7000.1-2007, GB24819-2009, GB/T24825, GB19510.14-2009 define the following terms and definitions apply to this document.
3.1 LED luminaire
We intend to use an LED light source lamps.
Note. See the definition of lamps in GB7000.1-2007 1.2.1.
3.2 integral LED luminaire
Unless permanent damage, not disassemble lamps, LED interior light contains all the additional elements and the light source is activated and stability required.
3.3 LED downlights
A method of using LED light source, the light irradiating small downward direct lighting, which can be flush mounted or fixed installation.
3.4 LED recessed downlights
An LED downlight, all or part of the luminaire embedded in the ceiling installation.
3.5 LED fixed downlights
An LED downlights, ceiling mounted or suspended luminaires installed in the ceiling surface.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 18 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 29294-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 29294-2012
$315.00