GB/T 28935-2012Assembled swimming pool (English PDF)
拆装式游泳池
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 28935-2012 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
November 20, 2012
Implementation date
May 1, 2013
Scope
GB/T 28935-2012 is the English-translated version of 拆装式游泳池.
GB/T 28935-2012 is the Chinese standard "Assembled swimming pool". Its scope clause reads: This standard specifies the requirements of demountable pool, inspection methods, inspection rules, transport and storage, installation and construction inspection. This standard applies to removable pool. Its clauses include requirements.
Found what you need?
Document preview — GB/T 28935-2012
National Standard of the People's Republic of China
- ICS
- 97.220.40
- Classification
- Y 55
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Requirements
- 5 Inspection Rules
- 6 Transportation 6 Storage
- 7 Installation and construction inspection
1 Scope
This standard specifies the requirements of demountable pool, inspection methods, inspection rules, transport and storage, installation and construction inspection.
This standard applies to removable pool.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
Determination of GB/T 529 vulcanized rubber or thermoplastic rubber tear strength (Trouser, angle and crescent test pieces) (GB/T 529-
2008, ISO 34-1.2004, MOD)
GB/T 531.1 vulcanized rubber or thermoplastic rubber hardness test pushed Part 1. Shore hardness method (Shore hardness) (GB/T 531.1-2008, ISO 7619-1.2004, IDT)
1033.1 Non-plastic foam density measurement GB/T Part 1. Immersion method, liquid pyknometer method and titration method (GB/T 1033.1-2008, ISO 1183-1.2004, IDT)
GB /1040.2 T Plastics Determination of tensile properties - Part 2. Test plastics molding and extrusion conditions (GB/T 1040.2-
2006, ISO 527-2.1993, IDT)
GB/T 1043.1 Determination of plastic Charpy impact properties - Part 1. Non-instrumented impact test (GB/T 1043.1-
2008, ISO 179-1.2000, IDT)
Plastic water absorption test method GB/T 1462 fiber reinforced
GB/T 1633 Thermoplastics Vicat softening temperature (VST) Determination (GB/T 1633-2000, ISO 306.1994, IDT)
GB/T 2406.2 Determination of burning behavior of plastics - Part 2 oxygen index. room temperature test (GB/T 2406.2-2009,
ISO 4589-2.1996, IDT)
GB/T 2411 plastic and hard rubber indentation hardness was measured using a durometer (Shore hardness) (GB/T 2411-2008, ISO 868.
2003, IDT)
GB/T 4100-2006 ceramic tiles (ISO 13006.1998, MOD)
GB/T 9341 plastic bending performance measurement (GB/T 9341-2008, ISO 178.2001, IDT)
GB/T 11982.1 PVC floor sheets - Part 1. PVC sheet flooring with a substrate
GB 12952 PVC waterproofing membrane
GB/T 17219-1998 drinking water distribution equipment and protective materials safety evaluation standards
GB/T 18244 building waterproof materials aging test method
CJJ122 Pool Water Supply and Drainage Technical Specification
CJ244-2007 swimming pool water quality standards
3 Requirements
3.1 Structure
3.1.1
removable swimming pool structure by bracing, consisting pool hoardings, support and pool liner and other components, see Figure 1 and structure […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 28935-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 28935-2012
$165.00