GB/T 28700-2012SWZ universal coupling with bearing box (English PDF)
SWZ型整体轴承座十字轴式万向联轴器
This is a limited preview
Buy now to download the full PDF (25 pages)
Need quotation for your management?
Get a formal quotation for GB/T 28700-2012 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
September 3, 2012
Implementation date
March 1, 2013
Scope
GB/T 28700-2012 is the English-translated version of SWZ型整体轴承座十字轴式万向联轴器.
GB/T 28700-2012 is the Chinese standard "SWZ universal coupling with bearing box". Its scope clause reads: This standard specifies the type SWZ overall bearing cross shaft universal coupling (hereinafter referred to as universal coupling) the type, basic parameters And size, technical requirements, inspection rules, marking, packaging and storage.
This standard applies to the Department of the universal joint shaft coupling two different axes of its swing diameter of 160mm ~ 550mm, Biography Hands nominal torque is 20kN · m ~ 830kN · m, axis angle of 10 °. Its clauses include types, basic parameters and dimensions.
Found what you need?
Document preview — GB/T 28700-2012
National Standard of the People's Republic of China
- ICS
- 21.120.20
- Classification
- J 19
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Introduction
- 1 Scope
- 2 Normative references
- 3 Types, basic parameters and dimensions
- 4. Technical Requirements
- 5 Inspection Rules
- 6 logo, packaging, storage
- Appendix A (informative) universal coupling selection Description
1 Scope
This standard specifies the type SWZ overall bearing cross shaft universal coupling (hereinafter referred to as universal coupling) the type, basic parameters
And size, technical requirements, inspection rules, marking, packaging and storage.
This standard applies to the Department of the universal joint shaft coupling two different axes of its swing diameter of 160mm ~ 550mm, Biography
Hands nominal torque is 20kN · m ~ 830kN · m, axis angle of 10 °.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated edition applies to this article
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 191 Packing Pictorial marking
GB/T 197 common thread tolerance
GB/T 1184 shape and position tolerances without individual tolerance value
GB/T 1800.2 limits and fits - Part 2. limit deviations of standard tolerance grades and hole axis
GB/T 3098.1 Mechanical properties of fasteners Bolts, screws and studs
GB/T 3098.2 Mechanical properties of fasteners coarse thread
GB/T 4879 rust-proof packaging
GB/T 6388 transport package shipping mark
GB/T 7284 wooden frame
GB/T 11345 steel welds manual ultrasonic testing and classification of testing results
GB/T 13384 mechanical and electrical products packaging General technical conditions
JB/T5000.1 heavy machinery - General requirements - Part 1. Product Inspection
JB/T5000.3 heavy machinery General requirements - Part 3. welded
Part 15 JB/T5000.15 Heavy mechanical general techniques. non-destructive testing of steel forgings
3 Types, basic parameters and dimensions
Type 3.1
Universal coupling type is divided into seven species in Table 1.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 25 pages — is available in the English PDF.
Similar standards
How to Download GB/T 28700-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 28700-2012
$435.00