Valid

GB/T 28699-2012Steel structure protection General requirements of coatings (English PDF)

钢结构防护涂装通用技术条件

Preview PDF

This is a limited preview

Buy now to download the full PDF (25 pages)

Need quotation for your management?

Get a formal quotation for GB/T 28699-2012 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

September 3, 2012

Implementation date

March 1, 2013

Scope

GB/T 28699-2012 is the English-translated version of 钢结构防护涂装通用技术条件.

GB/T 28699-2012 is the Chinese standard "Steel structure protection General requirements of coatings".

Its scope clause reads: This standard specifies the technical requirements of coating system, inspection methods, test and acceptance rules and typical coating systems for steel structures protection coating, as well as the requirements for safety, sanitation and environmental protection of coating operations.

This standard is applicable to the protective coating of steel structures and steel structure accessories. Its clauses include terms and definitions.

Found what you need?

Document preview — GB/T 28699-2012

National Standard of the People's Republic of China

ICS: 25.220.60
Classification: A 29

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Foreword i
1 Scope
2 Normative references
3 Terms and definitions
4 Coating system selection
5 Technical requirements for protective coating
6 Inspection method
7 Testing rules
8 Basic requirements for safety, sanitation and environmental protection in painting construction
9 Specifications for handover acceptance documents
Annex A (Informative) Typical anti-corrosion coatings of steel structures
Annex C (Informative) Technical requirements and test methods for shop primers of steel structures
Annex D (Informative) Technical requirements and test methods for anti-rust primers of steel structures
Annex F (Informative) Technical requirements and test methods for weather-resistant topcoats of steel structures
Annex H (Informative) Technical requirements and test methods for functional paints for steel structures
Bibliography
Table 1 Types of atmospheric corrosion and examples of typical environments
Table 2 Classification of corrosive environments of water and soil
Table 3 Cycle of cycle corrosion test
Table A.5 Supporting system for (general) anti-corrosion coatings in water and soil environments
Table A.6 Supporting system for (long-lasting) anti-corrosion coatings in water and soil environments
Table A.8 Supporting system for fire retardant coatings of steel structures
Table A.11 Inside anti-corrosion coatings in renovation coating of steel structure
Table B.1 Recommended minimum coating thicknesses for different use environments
Table B.2 Technical requirements for laboratory testing of thermally sprayed coatings
Table C.1 Technical requirements for shop primers of steel structures
Table D.1 Technical requirements for anti-rust primers of steel structures
Table E.1 Technical requirements for sealing and intermediate coatings for anti-corrosion coatings of steel structures
Table F.1 Technical requirements for weather-resistant topcoats of steel structures
Table G.1 Technical requirements for protective paints for steel structures in water and soil environments
Table H.1 Technical requirements for functional paints for steel structures

1 Scope

This standard specifies the technical requirements of coating system, inspection methods, test and acceptance rules and typical coating systems for steel structures protection coating, as well as the requirements for safety, sanitation and environmental protection of coating operations.

This standard is applicable to the protective coating of steel structures and steel structure accessories.

2 Normative references

The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition (including any amendments) applies.

GB/T 1730 Paints and varnishes - Pendulum damping test

GB/T 1732 Determination of impact resistance of coating films

GB/T 1740 Determination of resistance to heat and humidity of paint films

GB/T 1766 Paints and varnishes - Rating schemes of degradation of coats

GB/T 1768 Method of test for abrasion resistance of paint films

GB/T 1771 Paints and varnishes - Determination of resistance to neutral salt spray (fog)

GB/T 4956 Non-magnetic coatings on magnetic substrates - Measurement of coating thickness -Magnetic method

GB/T 5210 Paints and varnishes - Pull-off test for adhesion

GB 6514-2008 Safety code for painting - Safety, ventilation and air clean-up for painting process

GB/T 6742 Paints and varnishes - Bend test (cylindrical mandrel)

GB 7692-1999 Safety code for painting - Safety, ventilation and air clean-up for pretreatment process of painting

GB/T 8264 Glossary of painting terms

GB/T 8923-1988 Rust grades and preparation grades of steel surfaces before application of paints and related products

GB/T 9271 Paints and varnishes - Standard panels for testing

GB/T 9274 Paints and varnishes - Determination of resistance to liquids

GB/T 9286 Paints and varnishes-cross cut test for films

GB/T 9753 Paints and varnishes - Cupping test

GB/T 9793 Thermal spraying - Metallic and other inorganic coatings - Zinc, aluminium and their alloys

GB 11375-1999 Metallic and other inorganic coatings - Thermal spraying - Safe practices

GB/T 12608 Thermal spraying - Wires, rods and cords for flame and arc spraying - Classification and technical supply condition

GB/T 13288.2 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 2:Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator procedure

GB/T 13452.2-2008 Paints and varnishes - Determination of film thickness

GB/T 14522 Artificial weathering test method for plastics, coating and rubber materials used for machinery industrial products - Fluorescent UV lamps

GB/T 17850.1 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - General introduction and classification

GB/T 18570.3 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part3:Assessment of dust on steel surface prepared for painting(pressure-sensitive tape method)

GB/T 18570.6 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 6: Extraction of soluble contaminants for analysis - The Bresle method

GB/T 18570.9 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 8: Field method for the conductometric determination of water-soluble salts

GB/T 18593 Anti-corrosive painting of fusion bonded epoxy coating powders

GB/T 18838.1 Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - General introduction and classification

GB/T 18839.2 Preparation of steel substrates before application of paints and related products - Surface preparation methods - Abrasive blast-cleaning

3 Terms and definitions

For the purposes of this document, the terms and definitions given in GB/T 8264 and the following apply.

3.1 coating system

multi-layer coating composed of metallic coating or paint coating with protective and decorative functions

3.2 deformation adhesion test

cupping test carried out in the cross-cut area after the coating is cross-cut

3.3 cycle corrosion test

a cycle of cycle exposure test carried out in a certain sequence under the environmental conditions of ultraviolet (UV) / condensate (CON) / salt spray (NSS) / drying

3.4 inside anti-corrosion coatings

multilayer coating used in areas not exposed to ultraviolet rays

3.5 outside anti-corrosion coatings

multi-layer coatings used in ultraviolet irradiated areas […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 25 pages — is available in the English PDF.

Referenced standards

Cited by

Similar standards

GB/T 31361-2015|GB/T 18593-2010|GB/T 37187-2026|GB/T 11372-2025|GB/T 12333-2025|GB/T 18226-2025

How to Download GB/T 28699-2012

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.