GB/T 28696-2012Centrifuge separator drum balance - Inspection standard (English PDF)

1 Scope

This standard specifies the criteria for industrial centrifuge drum balance, balance separator drum guidelines, drum balance correction, drum balance correction people

Members and safety requirements balance correction, drum balance correction reports test specifications and requirements.

This standard applies to all kinds of a metal drum (with or without liner bag liner bag) industrial centrifuges, including industrial dewatering machine (hereinafter referred to as centrifugal

Machine) and a variety of industrial disc separator, tubular separator chamber separator (hereinafter referred to as separator) drum balance and current balance on the device

Field correction.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein

Member. For undated references, the latest edition (including any amendments) applies to this document.

Describe the inspection and evaluation of GB/T 4201 Balancing Machine

GB/T 4774 Mechanical separation Terminology

GB/T 6444 Mechanical vibration - Balancing Vocabulary

GB/T 6557-2009 mechanically flexible rotor balancing methods and guidelines (ISO 11342.1998/Cor.1.2000, IDT)

GB/T 9239.1 Mechanical vibration steady state (rigid) rotor balance quality requirements - Part 1. Specification and balance tolerance test

GB/T 9239.2 Mechanical vibration steady state (rigid) rotor balance quality requirements - Part 2. Balance errors

GB/T 10895-2004 centrifuge machine mechanical vibration test methods (ISO 10816-1.1995, NEQ)

JB/T 9390 Horizontal hard bearing balancing machines technical conditions

JB/T 9392 single vertical balancing machines technical conditions

JB/T 9393 Horizontal soft bearing balancing machine technical conditions

3 Terms and Definitions

GB/T 4774, GB/T 6444 defined by the following terms and definitions apply to this document.