GB/T 28677-2012Remanufacturing of automotive components - Cleaning (English PDF)
汽车零部件再制造 清洗
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 28677-2012 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
September 3, 2012
Implementation date
January 1, 2013
Scope
GB/T 28677-2012 is the English-translated version of 汽车零部件再制造 清洗.
GB/T 28677-2012 is the Chinese standard "Remanufacturing of automotive components -- Cleaning".
Its scope clause reads: This Standard specifies the terms and definitions of remanufacturing of automotive components - cleaning, as well as the general requirements, general cleaning classification methods and commonly used cleaning methods, etc. This Standard is applicable to the cleaning of the remanufacturing of automotive components.
The cleaning of the remanufacturing of other motor vehicle parts may take this as a reference. Its clauses include terms and definitions; general requirements for cleaning; general cleaning and classification methods; commonly used cleaning methods.
It was issued by the General Administration of Quality Supervision, Inspection and Quarantine on SEPTEMBER 3, 2012 and took effect on JANUARY 1, 2013.
Found what you need?
Document preview — GB/T 28677-2012
National Standard of the People's Republic of China
- ICS
- 43.020
- Classification
- T 40
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword3
- 1 Scope4
- 2 Normative References4
- 3 Terms and Definitions4
- 4 General Requirements for Cleaning4
- 5 General Cleaning and Classification Methods5
- 6 Commonly Used Cleaning Methods5
Foreword
This Standard was drafted in accordance with the rules in GB/T 1.1-2009.
1 Scope
This Standard specifies the terms and definitions of remanufacturing of automotive components - cleaning, as well as the general requirements, general cleaning classification methods and commonly used cleaning methods, etc.
This Standard is applicable to the cleaning of the remanufacturing of automotive components. The cleaning of the remanufacturing of other motor vehicle parts may take this as a reference.
2 Normative References
The following documents are indispensable to the application of this document. In terms of references with a specified date, only versions with a specified date are applicable to this document. In terms of references without a specified date, the latest version (including all the modifications) is applicable to this document.
GB/T 26989 Automobile Recovery - Terminology
3 Terms and Definitions
The terms and definitions defined in GB/T 26989 are applicable to this Standard.
4 General Requirements for Cleaning
4.1 Requirements for Cleanliness
4.1.1 In accordance with different conditions during cleaning, different cleaning methods are adopted to ensure that the requirements for cleanliness are met.
4.1.2 The cleanliness of various parts shall satisfy the cleanliness requirements of product design.
4.1.3 For the surface of sprayed, brush electroplated and bonded parts, the cleanliness shall satisfy the requirements of remanufacturing design.
4.2 Anti-corrosion Requirements
In the cleaning of parts, it is necessary to prevent the parts from corroding. For […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
Cited by
- GB/T 39899-2021The technical specifications for remanufactured automotive components—Automatic transmission
- QC/T 1139-2020Technical specifications for remanufactured automotive components - Connecting rods
- QC/T 1140-2020Technical specifications for remanufactured automotive components - Crankshafts
- GB/T 34595-2017The technical specifications for remanufacturing of automotive components—Water pump
- GB/T 34596-2017The technical specifications for remanufacturing of automotive components—Oil pump
- GB/T 34600-2017The technical specification for remanufacturing of automotive components—Spark and compression ignition engines
Similar standards
How to Download GB/T 28677-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 26989-2011 — Automobile recovery - Terminology
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
Secure payment via Stripe
Payments accepted
GB/T 28677-2012
$75.00