Valid

GB/T 28603-2012Production technical regulation for Anhydrous hydrogen fluoride (English PDF)

无水氟化氢生产技术规范

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 28603-2012 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

June 29, 2012

Implementation date

December 1, 2012

Scope

GB/T 28603-2012 is the English-translated version of 无水氟化氢生产技术规范.

GB/T 28603-2012 is the production technical regulation for anhydrous hydrogen fluoride, which the text shortens to AHF.

Clause 1 says the standard specifies the layout of the producing enterprise, the process design requirements, the basic technical requirements of production, the production principles, the production process control, the maintenance and repair of production equipment, product quality, production safety, and environmental protection and pollution control, and that it applies to existing and new anhydrous hydrogen fluoride production enterprises, new here including altered and expanded ones; no exclusion is stated.

Clause 2 cites GB/T 534, GB 4053.3, GB 7746, GB 8978-1996, GB 9078-1996, GB 12348-2008, GB 12349, GB 13271-2001, GB/T 16157, GB 16297, GB 18599, GB 50016, GB 50489, HG/T 2832 and YB/T 5217.

Clause 3, on layout and process design requirements, begins with 3.1 Basic requirements and 3.2 general layout requirements, and its subclause 3.2.1 Site Selection asks that new, renovated and expanded plants avoid densely populated areas, stand on the upwind side of the minimum annual frequency wind direction, stay out of what the draft calls the nest wind zone, and comply with GB 50489.

The draft breaks off inside that subclause, so the clauses after 3.2.1.2 are not shown on the page. The page files the standard under ICS 71.060.01 and Chinese classification G10 as a recommended national standard, proposed by China Petroleum and Chemical Industry Association and administered by SAC/TC63/SC1.

Its users are the anhydrous hydrogen fluoride production enterprises named in clause 1, for plant siting, process design, process control, equipment upkeep and pollution control. It was issued on 29 June 2012 and has applied since 1 December 2012.

Found what you need?

Document preview — GB/T 28603-2012

National Standard of the People's Republic of China

ICS: 71.060.01
Classification: G 10

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Foreword
1 Scope
2 Normative references
3 Layout, process design requirements

Foreword

This standard rule according to GB/T 1.1-2009 given draft. The standard proposed by China Petroleum and Chemical Industry Association.

1 Scope

This standard specifies the anhydrous hydrogen fluoride (referred to as AHF), the company's layout, process design requirements, the production of basic technical requirements, Production principles, production process control, production equipment maintenance and repair, product quality, production safety, environmental protection and pollution control.

This instruction applies to existing, new (including change, expansion) of anhydrous hydrogen fluoride production enterprises.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated edition applies to this document. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 534 industrial sulfuric acid

GB 4053.3 fixed ladders and platforms - Safety requirements - Part 3: Industrial guardrails and steel platform

GB 7746 industrial anhydrous hydrogen fluoride

GB 8978-1996 Integrated Wastewater Discharge Standard

GB 9078-1996 industrial furnace air pollutant emission standards

GB 12348-2008 industrial enterprises of environmental noise emission standard plant boundary

GB 12349 boundary of industrial enterprises noise measurement method

GB 13271-2001 boiler air pollutant emission standards

GB/T 16157 stationary source emission of particulates and gaseous pollutants measured sampling methods

GB 16297 Air Pollutant Emission Standards

GB 18599 general industrial solid waste storage and disposal site pollution control standards

GB 50016 architectural design code for fire protection

GB 50489 chemical companies General Plan and Transportation Design Code

HG/T 2832 industry fluosilicic

YB/T 5217 fluorite

3 Layout, process design requirements

3.1 Basic requirements

Anhydrous hydrogen fluoride production plant construction should achieve scientific and advanced, safe, reliable, reasonable energy saving, high quality and efficiency, environmental protection requirements.

3.2 General layout requirements

3.2.1 Site Selection

3.2.1.1 new construction, renovation, expansion of corporate site selection should avoid densely populated areas, arranged in centralized places or people in general industrial areas Minimum annual frequency of wind direction upwind side. Not arranged in the nest wind zone.

3.2.1.2 site selection should be consistent with the provisions of GB 50489.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Normative references

GB 7746 · GB 12349

Similar standards

GB/T 23834.7-2026|GB/T 30903-2026|GB/T 31197-2026|GB/T 23941-2025|GB/T 3051-2025|GB/T 45967-2025

How to Download GB/T 28603-2012

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.