Valid

GB/T 28533.1-2012Coupling connector for use in explosive gas atmospheres - Part 1: Type of protection “n” coupling connector (English PDF)

爆炸性气体环境用电气耦合连接器 第1部分:“n”型耦合连接器

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 28533.1-2012 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

June 29, 2012

Implementation date

November 1, 2012

Scope

GB/T 28533.1-2012 is the English-translated version of 爆炸性气体环境用电气耦合连接器 第1部分:“n”型耦合连接器.

GB/T 28533.1-2012 is the Chinese standard "Coupling connector for use in explosive gas atmospheres - Part 1: Type of protection “n” coupling connector".

Its scope clause reads: This section GB/T 28533 requirements class II explosive gas atmospheres "n" electrical coupling connector (hereinafter referred to as the coupling connector Device) terms and definitions, and basic parameters, technical requirements, test methods, inspection rules, signs, brochures, packaging, transportation and storage.

This section applies to the rated voltage not higher than 690VAC/DC explosive gas atmospheres II class type "n" (EPLGc) coupling connected Connector. This section does not apply to "n" explosion-proof socket device type and other type of protection coupling connector.

Found what you need?

Document preview — GB/T 28533.1-2012

National Standard of the People's Republic of China

ICS
29.260.20
Classification
K 35

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope1
  • 2 Normative references1
  • 3 Terms and definitions2
  • 4 Types and basic parameters2
  • 5 Technical requirements3
  • 6 Test methods7
  • 7 Inspection rules9
  • 8 signs, brochures, packaging, transportation and storage11

1 Scope

This section GB/T 28533 requirements class II explosive gas atmospheres "n" electrical coupling connector (hereinafter referred to as the coupling connector

Device) terms and definitions, and basic parameters, technical requirements, test methods, inspection rules, signs, brochures, packaging, transportation and storage.

This section applies to the rated voltage not higher than 690VAC/DC explosive gas atmospheres II class type "n" (EPLGc) coupling connected

Connector.

This section does not apply to "n" explosion-proof socket device type and other type of protection coupling connector.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated edition applies to this article

Member. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 2423.1-2008 Environmental testing for electric and electronic products Part 2. Test methods Test A. Cold (IEC 60068-2-

1.2007, IDT)

GB/T 2423.2-2008 Environmental testing for electric and electronic products Part 2. Test methods Test B. high temperature (IEC 60068-2-

2.2007, IDT)

GB/T 2423.3-2006 Environmental testing for electric and electronic products Part 2. Test methods - Test Cab. Damp heat test (IEC 60068-2-78.2001, IDT)

GB/T 2423.5-1995 Environmental testing for electric and electronic products Part 2. Test methods Test Ea and guidance. Shock (IdtIEC 60068-2-27. 1987)

GB/T 2423.10-2008 Electrical and Electronic Products Environmental Testing Part 2. Test methods Test Fc. Vibration (sinusoidal) (IEC 60068-2-6.1995, IDT)

GB/T 2900.35-2008 Electrotechnical terminology explosive atmospheres equipment (IEC 60050-426.2008, IDT)

GB 3836.1-2010 Explosive atmospheres - Part 1. General requirements for equipment (IEC 60079-0.2007, MOD)

GB 3836.8-2003 Electrical apparatus for explosive gas atmospheres - Part 8. "n" electrical equipment (IEC 60079-15.2001,

MOD)

GB 4208-2008 enclosure protection (IP code) (IEC 60529.2001, IDT)

GB/T 5095.2-1997 electronic equipment - Basic testing procedures and measuring methods - Electromechanical components - Part 2. General examination, electrical

Continuity and contact resistance tests, insulation tests and voltage stress test (idtIEC 512-2.1994)

GB/T 5095.5-1997 electronic equipment - Basic testing procedures and measuring methods - Electromechanical components - Part 5. Impact tests (from

By the member), static load tests (fixed components), endurance tests and overload tests (idtIEC 512-5.1992)

GB/T 5095.7-1997 electronic equipment - Basic testing procedures and measuring methods - Electromechanical components - Part 7. Mechanical operating test

Test and tightness test (idtIEC 512-7.1993)

GB/T 5095.8-1997 electronic equipment - Basic testing procedures and measuring methods - Electromechanical components - Part 8. Connector contact

And terminations of mechanical tests (idtIEC 512-8.1993)

GB/T 11918-2001 industrial plug and socket couplers - Part 1. General requirements (idtIEC 60309-1.1999)

GB/T 13384-2008 mechanical and electrical products packaging General technical conditions […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 28533.1-2012

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 28533.1-2012

$195.00