Valid

GB/T 28510-2012Technical specification of stream control transmission protocol (English PDF)

流控制传送协议（SCTP）

Preview PDF

This is a limited preview

Buy now to download the full PDF (65 pages)

Need quotation for your management?

Get a formal quotation for GB/T 28510-2012 in 30 minutes.

Issued by

Standardization Administration of China

Level / Type

National · Recommended

Issue date

June 29, 2012

Implementation date

October 1, 2012

Scope

GB/T 28510-2012 is the English-translated version of 流控制传送协议（SCTP）.

GB/T 28510-2012 — This standard specifies the signaling stream control transmission protocol (SCTP) function, primitive, formats and parameters defined SCTP packet, SCTP Endpoint maintenance and associated parameters recommended values \u200b\u200band SCTP program.

This standard applies to the completion of NO.7 signaling IP network interworking signaling gateway equipment and softswitch IP network for call control in other switches and other equipment.

Found what you need?

Document preview — GB/T 28510-2012

National Standard of the People's Republic of China

ICS: 33.040.30
Classification: M 12

Issued by: Standardization Administration of China

Introduction
1 Scope
2 Normative references
3 Terms and definitions, abbreviations
3.1 Terms and definitions
3.2 Abbreviations
4 SCTP Functional Description
4.1 Overview
4.2 SCTP structure
4.3 SCTP features
5 SCTP primitives defined
5.1 OVERVIEW
5.2 High-level protocol (ULP) request is sent to the SCTP primitives
5.3 SCTP notification sent to the high-level protocol primitives
Format and parameter definitions 6 SCTP packet
6.1 SCTP packet format
6.2 SCTP format data block

Foreword

This standard rule according to GB/T 1.1-2009 given draft.

The standard reference method using redrafted IETFRFC2960.2000 "Streaming Control Protocol (SCTP)" establishment.

This standard IETFRFC2960 of non-equivalent, the main differences are as follows.

--- According to Chinese customs for some formatting has been modified;

--- The state transition diagram of SCTP and SCTP program adjustment informative appendices;

--- Not adopted IETFRFC2960 in Chapter 11, "security considerations", Chapter 13, "IANA considerations" content.

The standard proposed by the Ministry of Industry and Information Technology of the People's Republic of China.

The standard by the China Communications Standards Association.

This standard was drafted. the Ministry of Industry and Information Technology and Telecommunications Research Institute, ZTE Corporation, Huawei Technologies Co., seashells Seoul Limited.

1 Scope

This standard specifies the signaling stream control transmission protocol (SCTP) function, primitive, formats and parameters defined SCTP packet, SCTP Endpoint maintenance and associated parameters recommended values \u200b\u200band SCTP program.

This standard applies to the completion of NO.7 signaling IP network interworking signaling gateway equipment and softswitch IP network for call control in other switches and other equipment.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated edition applies to this article Member. For undated references, the latest edition (including any amendments) applies to this document.

IETFRFC1191 passage found in the maximum transmission unit (MTU) of (PathMTUdiscovery) IETFRFC1123 Internet host application requirements and support (RequirementsforInternetHosts-Appli-cationandsupport) IETFRFC1750 random recommendations for security purposes (Randomnessrecommendationsforsecurity) IETFRFC1981 for path MTU discovery of IPV6 (PathMTUDiscoveryforIPversion6) IETFRFC2104 HMAC. message authentication key hashing (HMAC. Keyed-Hashingformessageau-thentication) IETFRFC2460 Internetworking Protocol Version 6 specification (Internetprotocol, version6 (IPv6) Specification) IETFRFC2481 increase in IP layer explicitly Congestion Notification (ECN) recommendations (Aproposaltoaddexplicitcon-gestionnotification (ECN) toIP) IETFRFC2581 TCP congestion control (TCPcongestioncontrol)

3 Terms and definitions, abbreviations

3.1 Terms and Definitions

The following terms and definitions apply to this document.

3.1.1

SCTP association SCTPassociation in a correspondence between two SCTP endpoints, which includes two SCTP endpoints, including verification and labels and transfer order number Code and other information, including the protocol status information, a coupling can be coupled by the use of the SCTP transport address to uniquely identify the endpoint in any What time between two SCTP endpoints will not be more than one coupling.

3.1.2

SCTP endpoint SCTPendpoint SCTP packet logic recipient or sender on a host multi-homing, SCTP endpoints may be made of a remote host table Shown as SCTP packet can be sent to a group of qualified transfer destination address, or can receive a group of qualified SCTP packet Transfer origin address all transport address a SCTP endpoint should use the same port number, but you can use multiple IP addresses.

Transport address SCTP endpoint should be unique.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 65 pages — is available in the English PDF.

Referenced standards

Cited by

How to Download GB/T 28510-2012

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.