Valid

GB/T 29198-2012Technical requirements of adaptation layer of No.7 signalling interworking with IP MTP2 peer-to-peer adaptation layer (English PDF)

No.7信令与IP互通适配层技术要求 消息传递部分(MTP)第二级对等适配层(M2PA)

Preview PDF

This is a limited preview

Buy now to download the full PDF (28 pages)

Need quotation for your management?

Get a formal quotation for GB/T 29198-2012 in 30 minutes.

Issued by

Standardization Administration of China

Level / Type

National · Recommended

Issue date

December 31, 2012

Implementation date

June 1, 2013

Scope

GB/T 29198-2012 is the English-translated version of No.7信令与IP互通适配层技术要求 消息传递部分(MTP)第二级对等适配层(M2PA).

GB/T 29198-2012 — This standard specifies the functional No.7 signaling message transfer part of the second stage peer adaptation layer (M2PA) protocol, message parameters, formats, and program.

This standard applies to adoption M2PA protocol as the signaling transport protocol adapter IP signaling points, signaling gateways and other equipment.

Found what you need?

Document preview — GB/T 29198-2012

National Standard of the People's Republic of China

ICS
33.040.30
Classification
M 10

Issued by: Standardization Administration of China

Contents

  • Introduction
  • 1 Scope
  • 2 Normative references
  • 3 Terms, Definitions and Abbreviations
  • 3.1 Terms and definitions
  • 3.2 Abbreviations
  • 4 Summary
  • 4.1 Signaling transport structure
  • 4.2 Signaling point represent
  • 4.3 M2PA provide services
  • Function provided 4.4 M2PA
  • 5 4.5 M2PA defined boundaries
  • 4.6 M2PA information registered in the IANA
  • 5 6 Message Format
  • 5.1 Public header
  • 5.2 M2PA dedicated message header
  • 5.3 M2PA message
  • 5.4 Extended switching command switching and extended acknowledgment message (XCO and XCA)
  • 6 M2PA link state control
  • 6.1 SCTP coupling state control
  • 6.2 M2PA link state control
  • 7 Program
  • 7.1 Basic Principle
  • 7.2 Features support MTP2 program
  • 7.3 Supports the MTP3/MTP2 interface program
  • 8 Timer
  • 9 Security
  • Appendix A (normative appendix) M2PA program Example
  • Annex B (informative) correspondence between the coupling and M2PA link
  • Appendix C (Informative Appendix) SCTP slow start on M2PA

Foreword

This standard is "No.7 signaling adaptation layer and IP interworking technical requirements" of the national standard series, the series of national standards is expected structure as follows.

--- No.7 signaling interworking with IP adaptation layer specification message transfer part (MTP) second level user adaptation layer (M2UA);

--- No.7 signaling interworking with IP adaptation layer specification message transfer part (MTP) third level User Adaptation Layer (M3UA);

--- No.7 signaling interworking with IP adaptation layer specification message transfer part (MTP) second stage peer adaptation layer (M2PA).

This standard was drafted in accordance with GB/T 1.1-2009 given rules.

The standard reference method using redrafted IETFRFC4165.2005 "SS7 Message Transfer Part 2 (MTP2) Users Peer adaptation layer (M2PA) protocol, "prepared with IETFRFC4165.2005 degree of consistency equivalent non. The main differences are as follows.

--- Explicitly requested not to send a message to the user data on the distal end processor in the case of failure;

--- According to the actual situation of China's network gives recommendations timer ranges.

The standard proposed by the Ministry of Industry and Information Technology of the People's Republic of China.

The standard by the China Communications Standards Association.

This standard was drafted. the Ministry of Industry and Information Technology and Telecommunications Research Institute, Shanghai Bell Co., Ltd., ZTE Corporation.

1 Scope

This standard specifies the functional No.7 signaling message transfer part of the second stage peer adaptation layer (M2PA) protocol, message parameters, formats, and program.

This standard applies to adoption M2PA protocol as the signaling transport protocol adapter IP signaling points, signaling gateways and other equipment.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 28510-2012 stream control transmission protocol (SCTP) GF001-9001 Chinese domestic telephone network No.7 signaling specifications Service specific coordination function ITU-TQ.2140 B-ISDN signaling ATM adaptation layer network node interface signaling (SSCF-NNI) (B-ISDNATMadaptationlayer-Servicespecificcoordinationfunctionforsignalingatthenet-worknodeinterface (SSCFATNNI)) Message Transfer Part level 3 functions and messages using the ITU-TQ.2210 ITU-TQ.2140 business (Messagetransfer partlevel3functionsandmessagesusingtheservicesofITU-TrecommendationQ.2140) Security Considerations IETFRFC3788 signaling transport protocol (Securityconsiderationsforsignalingtransportproto-cols)

3 Terms, definitions and abbreviations

3.1 Terms and Definitions

GB/T 28510-2012 define the following terms and definitions apply to this document.

3.1.1

MTP2 user MTP2-User

Using a protocol MTP2 service. MTP2 only users MTP3. MTP2 users equal M2PA users.

3.1.2

Signaling points signalingendpoint Origination or termination signaling messages No.7 signaling point.

3.1.3

IP signaling point IPsignalingpoint with IP network connections, use the IP bearer No.7 signaling No.7 signaling point.

3.1.4

Signaling Gateway in IP network and SCN signaling bearer network boundaries for conversion devices. In this case, both for a SG No.7

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 28 pages — is available in the English PDF.

Referenced standards

How to Download GB/T 29198-2012

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Instant delivery (0–9 sec)

    Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
28 pages
Instant delivery (0–9 sec)
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 29198-2012

$455.00