GB/T 28509-2012Ultrafine coaxial cables with insulation diameter below 1mm and cable assemblies (English PDF)
绝缘外径在1mm以下的极细同轴电缆及组件
This is a limited preview
Buy now to download the full PDF (25 pages)
Need quotation for your management?
Get a formal quotation for GB/T 28509-2012 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
June 29, 2012
Implementation date
October 1, 2012
Scope
GB/T 28509-2012 is the English-translated version of 绝缘外径在1mm以下的极细同轴电缆及组件.
GB/T 28509-2012 is the Chinese standard "Ultrafine coaxial cables with insulation diameter below 1mm and cable assemblies".
Its scope clause reads: This standard specifies the insulating outer diameter of 1mm or less fine coaxial cable (hereinafter referred to as cable) and component (hereinafter referred to as components) to Requirements, test methods, inspection rules, signs and packaging requirements.
This standard applies to communication equipment or similar electronic device operating frequency range between equipment or between internal module DC ~ 6000MHz Connecting cable and thus type cable connector assembly consisting of a short distance. Its clauses include terms and definitions; products.
Found what you need?
Document preview — GB/T 28509-2012
National Standard of the People's Republic of China
- ICS
- 33.040.50
- Classification
- M 42
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Product Category
- 4.1 Cable
- 4.2 Component
- 5 Requirements
- 5.1 Cable
- 5.2 assembly
- 6 Test methods
- 6.1 General Description
- 6.2 Cable Test Method
- 6.3 Component Test Method
- 7 Inspection rules
- 7.1 Inspection classification
- 7.2 cable inspection requirements
- 7.3 component inspection requirements
- 8 packing, packaging and marking, product certification, transportation and storage
- 8.1 Packaging, logo, product certification
- 8.2 Transport
- 8.3 Storage
- 9 Installation and use requirements
- Appendix A (normative) cable insulation technical requirements
- Appendix B (normative) cable sheathing material technical requirements
- Annex C (informative) Capacitance engineering reference value
- Annex D (normative) Cable assemblies commonly used model specifications and code
1 Scope
This standard specifies the insulating outer diameter of 1mm or less fine coaxial cable (hereinafter referred to as cable) and component (hereinafter referred to as components) to
Requirements, test methods, inspection rules, signs and packaging requirements.
This standard applies to communication equipment or similar electronic device operating frequency range between equipment or between internal module DC ~ 6000MHz
Connecting cable and thus type cable connector assembly consisting of a short distance.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated edition applies to this article
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 2951.13-2008 and optical cables - Common test methods for insulating and sheathing materials - Part 13. General test method
Density Determination of water absorption tests - Shrinkage test (IEC 60811-1-3.2001, IDT)
GB/T 6995.2-2008 wire and cable identification methods - Part 2. Standard colors
GB/T 8815-2008 wire and cable with a soft PVC GB/T 11327.1-1999 PVC insulated low-frequency telecommunication cables and wires - Part 1. General test and measurement
Volume method (IEC 60189-1. 1986, NEQ)
GB/T 17737.1-2000 frequency cables - Part 1. Generic specification - General, definitions, requirements and test methods (IEC 61196-1.
1995, IDT)
GB/T 17738.1-1999 RF coaxial cable assemblies - Part 1. Generic specification - General requirements and test methods (IEC 60966-1.
1988, IDT)
GJB360A-1996 test methods for electronic and electrical component
GJB1215A-2005 RF cable assemblies - Generic specification
SJ/T11363 electronic information products of toxic and hazardous substances in requirements
SJ/T11365 Electronic Information Products Testing methods for hazardous substances
3 Terms and Definitions
Terms and definitions GB/T 17737.1-2000 and GB/T 17738.1-1999 defined in this document apply.
4 Products
4.1 Cable
4.1.1 Cable Type
Cable Type by the type code, two-part specification code. Type the code shown in Table 1, Table 2 specification code.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 25 pages — is available in the English PDF.
Similar standards
How to Download GB/T 28509-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 28509-2012
$435.00