GB/T 28486-2012Determination of dimethyl fumarate in mildew preventives (English PDF)
防霉剂中富马酸二甲酯含量的测定
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 28486-2012 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
June 29, 2012
Implementation date
November 1, 2012
Scope
GB/T 28486-2012 is the English-translated version of 防霉剂中富马酸二甲酯含量的测定.
GB/T 28486-2012 is the Chinese standard "Determination of dimethyl fumarate in mildew preventives". Its scope clause reads: This standard specifies the method for detecting fungicide dimethyl fumarate content.
This standard applies to the determination of dimethyl fumarate in fungicide content. Gas chromatography is suitable for measuring the sample concentration of not less than 500mg/kg when, gas chromatography - mass spectrometry method is suitable for low concentration samples To 500mg/kg, but not lower than the determination 0.1mg/kg when.
Its clauses include basic information of dimethyl fumarate; method summary; reagents and materials.
Found what you need?
Document preview — GB/T 28486-2012
National Standard of the People's Republic of China
- Classification
- G 17
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Basic information of dimethyl fumarate
- 3 Method summary
- 3.1 Gas Chromatography
- 3.2 Gas chromatography - mass spectrometry
- 4 Reagents and materials
- 4.1 ethyl acetate. analytical purity >=99.5%, by 5Å molecular sieve dehydration process.
- 4.2 Dimethyl fumarate. standards, purity >=99%.
- 4.3 dimethyl succinate. internal standard, the GC grade, purity >=99%.
- 4.4 polytetrafluoroethylene (PTFE) porous membrane. pore size of 0.45µm.
1 Scope
This standard specifies the method for detecting fungicide dimethyl fumarate content.
This standard applies to the determination of dimethyl fumarate in fungicide content.
Gas chromatography is suitable for measuring the sample concentration of not less than 500mg/kg when, gas chromatography - mass spectrometry method is suitable for low concentration samples
To 500mg/kg, but not lower than the determination 0.1mg/kg when.
2 Basic information of dimethyl fumarate
Dimethyl fumarate (Dimethylfumarate, CAS Registry Number. 624-49-7), its structural formula shown in Figure 1.
Formula 1 dimethyl fumarate
3 Method summary
3.1 Gas Chromatography
The ethyl acetate extract fungicide dimethyl fumarate dehydration, dimethyl succinate was added as an internal standard gas chromatography - flame from
Determination of dimethyl fumarate, the internal standard quantum detector method.
3.2 Gas chromatography - mass spectrometry
Extracted with ethyl acetate dehydration of fungicide dimethyl fumarate, dimethyl succinate was added as an internal standard, and the extract was concentrated and dilute
Determination of dimethyl fumarate content of the internal standard quantitative mass spectrometry - after by gas chromatography.
4 Reagents and materials
4.1 ethyl acetate
analytical purity >=99.5%, by 5Å molecular sieve dehydration process.
4.2 Dimethyl fumarate
standards, purity >=99%.
4.3 dimethyl succinate
internal standard, the GC grade, purity >=99%.
4.4 polytetrafluoroethylene (PTFE) porous membrane
pore size of 0.45µm.
4.5 standard stock solution
Weigh accurately a certain amount of dimethyl fumarate (4.2), with ethyl acetate (4.1) formulated into an appropriate concentration of the stock solution.
4.5.1
Standard stock solution a. Weigh accurately 5.0g of dimethyl fumarate (accurate to 0.1mg), with ethyl acetate volume to 25mL this.
Concentration of 200g/L, at 0 °C ~ 4 °C sealed, valid for two months.
4.5.2 Standard stock solution b
Accurately weigh 0.10g dimethyl fumarate (accurate to 0.1mg), with ethyl acetate volume to 50mL this.
Concentration of 2.00g/L, sealed and stored at 0 °C ~ 4 °C, valid for one month.
4.5.3 Standard stock solution c
Take 2.50mL stock standard solution b (4.5.2), set the volume to 200mL with ethyl acetate, the solution concentration.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 28486-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 28486-2012
$165.00