GB/T 28452-2012Information security technology - Common security technique requirement for application software system (English PDF)
信息安全技术 应用软件系统通用安全技术要求
This is a limited preview
Buy now to download the full PDF (41 pages)
Need quotation for your management?
Get a formal quotation for GB/T 28452-2012 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
June 29, 2012
Implementation date
October 1, 2012
Scope
GB/T 28452-2012 is the English-translated version of 信息安全技术 应用软件系统通用安全技术要求.
GB/T 28452-2012 is the Chinese standard "Information security technology - Common security technique requirement for application software system". Its scope clause reads: This standard specifies the security level in accordance with 5 GB 17859-1999 division of application software system level protection General technical requirements involved.
This standard applies to the security level in accordance with the five security levels divided GB 17859-1999 on the application of software systems Design and implementation of protection.
For safe protection according to GB 5 The classification 17859-1999 application software for security systems Full protection grade test, management can also refer to use. Its clauses include terms and definitions, abbreviations.
Found what you need?
Document preview — GB/T 28452-2012
National Standard of the People's Republic of China
- ICS
- 35.020
- Classification
- L 80
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions, abbreviations
- 3.1 Terms and definitions
- 3.2 Acronyms
- 4 application software life cycle Safety requirements
- 4.1 application software beginning Safety requirements
- 4.2 Application Software obtained or developed stage 3 Safety requirements
- 4.3 application software implementation and evaluation phase 3 Safety requirements
- 4.4 application software operation and maintenance phase 4 Safety requirements
- 4.5 application is terminated and disposal phases Safety requirements
- 5 The first application software system security technical requirements
- 4 technical requirements 5.1 security features
- 5.1.1 User authentication
- 5.1.2 Discretionary Access Control
- 5.1.3 User data integrity protection
- 5.1.4 Backup and Recovery
- 5.2 Technical requirements for security guarantees
- 5.2.1 Security Subsystem own security requirements
- 5.2.2 security subsystem design and implementation requirements
- 6 second-stage application software system security technical requirements
- 6.1 Technical requirements 8 security features
- 6.1.1 user authentication
- 6.1.2 Discretionary Access Control
- 6.1.3 Security Audit
- 6.1.4 integrity of user data protection
- 6.1.5 User data privacy protection
- 6.1.6 Backup and Recovery
- 6.1.7 Detection and Analysis System Security
- 6.2 Technical security assurance requirements
- 6.2.1 security subsystem itself claimed
- 6.2.2 security subsystem design and implementation requirements
- 7 Third level application software system security technical requirements
- 7.1.1 User authentication
- 7.1.2 Non-repudiation
- 7.1.3 Discretionary Access Control
- 7.1.4 numeral
- 7.1.5 Mandatory Access Control
- 7.1.6 Security Audit
- 7.1.7 User data integrity protection
- 7.1.8 User data privacy protection
- 7.1.9 Backup and Recovery
- 7.1.10 security detection and analysis system
- 7.2 Technical security assurance requirements
- 7.2.1 security subsystem itself claimed
- 7.2.2 security subsystem design and implementation requirements
- 8 The fourth application software system security technical requirements
- 8.1.1 User authentication
- 8.1.2 Non-repudiation
- 8.1.3 Discretionary Access Control
- 8.1.4 mark
- 8.1.5 Mandatory Access Control
- 8.1.6 Security Audit
- 8.1.7 User data integrity protection
- 8.1.8 User data privacy protection
- 8.1.9 Trusted Path
- 8.1.10 Backup and Recovery
- 8.1.11 security detection and analysis system
- 8.2 Technical security assurance requirements
- 8.2.1 security subsystem itself claimed
- 8.2.2 security subsystem design and implementation requirements
- 9 The fifth application software system security technical requirements
- 9.1.1 User authentication
- 9.1.2 Non-repudiation
- 9.1.3 Discretionary Access Control
- 9.1.4 marker
- 9.1.5 Mandatory Access Control
- 9.1.6 Security Audit
- 9.1.7 User data integrity protection
- 9.1.8 User data privacy protection
- 9.1.9 Trusted Path
- 9.1.10 Backup and Recovery
- 9.1.11 security detection and analysis system
- 9.2 Technical security assurance requirements
- 9.2.1 security subsystem itself claimed
- 9.2.2 security subsystem design and implementation requirements
- Annex B (informative) Application Software System Security and Information Systems Security Relationship
1 Scope
This standard specifies the security level in accordance with 5 GB 17859-1999 division of application software system level protection
General technical requirements involved.
This standard applies to the security level in accordance with the five security levels divided GB 17859-1999 on the application of software systems
Design and implementation of protection. For safe protection according to GB 5 The classification 17859-1999 application software for security systems
Full protection grade test, management can also refer to use.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB 17859-1999 computer information system security protection classification criterion
GB/T 20271-2006 Information security technology - Common security techniques requirement information system
GB/T 20272-2006 Information security technology Security techniques requirement for operating system
GB/T 20273-2006 Information security technology Security techniques requirement for database management system
3 Terms and definitions, abbreviations
3.1 Terms and Definitions
GB/T 20271-2006 define the following terms and definitions apply to this document.
3.1.1 Application software systems
An important part of information systems refers to the information system for processing a particular business software systems.
3.1.2 Application software systems security technology
To ensure system security software application to determine the technological measures to achieve security objectives may be employed in the art.
3.1.3 Application software system security subsystem (SSOASS)
General application software systems security module. It establishes a basic security system to protect the environment applications, and provides
Additional user application software security system requires service. In accordance with GB 17859-1999 for trusted computing base (TCB) is defined, SSOASS It is an application software system TCB. Wherein the required hardware and firmware support is provided by low-level security mechanism.
3.1.4 SSOASS Security Policy (SSP) SSOASSsecuritypolicy
The resources of SSOASS rules management, protection and distribution. A SSOASS can have one or more security
Strategy.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 41 pages — is available in the English PDF.
Referenced standards
Cited by
- GB/T 46917.3-2026Standard semantic knowledge base - Part 3: Technical requirements for semantic integration
- GA/T 2175-2024Specifications for access of integrated traffic command platform of public security
- GB/T 44891-2024Specifications for the data service platform construction of the unified social credit identifier for legal entities and other organizations
- GB/T 42808-2023Technical requirements for electronic data exchange of shipping and railway combined transport in port
- GB/T 42811-2023Technical requirements for port container operating system
- GB/T 43616-2023Gas cylinder informatization—General requirements
Similar standards
How to Download GB/T 28452-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 28452-2012
$650.00