GB/T 28432-2012Planning criteria for single frequency networks of digital terrestrial television broadcasting (English PDF)
地面数字电视广播单频网规划准则
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 28432-2012 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
June 29, 2012
Implementation date
October 1, 2012
Scope
GB/T 28432-2012 is the English-translated version of 地面数字电视广播单频网规划准则.
GB/T 28432-2012 is the Chinese standard "Planning criteria for single frequency networks of digital terrestrial television broadcasting". Its scope clause reads: This standard specifies the planning guidelines in line with GB 20600-2006 terrestrial digital television broadcasting system SFN.
This standard applies to terrestrial digital television broadcast single frequency network planning. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 28432-2012
National Standard of the People's Republic of China
- ICS
- 33.160
- Classification
- M 63
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Minimum equivalent field strength and minimum median equivalent field strength
- 5 RF protection ratio and multipath signal processing
- Appendix A (normative) Minimum equivalent field strength and minimum median equivalent field strength calculation
- Annex B (informative) channel model parameters
- References
1 Scope
This standard specifies the planning guidelines in line with GB 20600-2006 terrestrial digital television broadcasting system SFN.
This standard applies to terrestrial digital television broadcast single frequency network planning.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated edition applies to this article
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB 20600-2006 digital terrestrial television broadcasting transmission system frame structure, channel coding and modulation
GB/T 26252-2010 VHF/UHF band terrestrial digital TV broadcasting frequency planning criteria
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1 Minimum equivalent field strength
In no other signal interference, to ensure the normal reception of terrestrial digital television receiver, the minimum required field strength.
3.2 Minimum median equivalent field strength
For consideration received signal strength with time, place and other statistical factors change, to ensure the normal reception of terrestrial digital television receiver, the minimum required in
The value of field strength.
3.3 RF protection ratio
Ensure that under normal reception conditions, wish to receive the signal and non wish to receive the minimum signal power ratio at the receiver input is usually measured in decibels (DB) values.
3.4 Doppler category
With specific amplitude distribution and the corresponding Doppler spectrum characteristic decline category.
4 Minimum equivalent field strength and minimum median equivalent field strength
4.1 Calculation Method
Terrestrial digital television broadcast single frequency network planning used the minimum equivalent field strength and minimum median equivalent field strength in each system according to different reception mode
Way different channel and carrier to noise ratio environments threshold calculation, calculation formula see Appendix A.
4.2 carrier to noise ratio threshold
4.2.1 fixed reception carrier to noise ratio threshold
For fixed receive terrestrial digital TV broadcast single frequency network in a relatively strong signal stations transmit the reception area, that there all the way […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 28432-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 28432-2012
$195.00