Valid

GB/T 28276-2012Silicon-based MEMS fabrication technology - Specification for the dissolved wafer process (English PDF)

硅基MEMS制造技术 体硅溶片工艺规范

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 28276-2012 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

May 11, 2012

Implementation date

December 1, 2012

Scope

GB/T 28276-2012 is the English-translated version of 硅基MEMS制造技术 体硅溶片工艺规范.

GB/T 28276-2012 is the Chinese standard "Silicon-based MEMS fabrication technology - Specification for the dissolved wafer process". Its scope clause reads: This standard specifies the use of bulk silicon dissolving tablet technology for MEMS device fabrication process to be followed in the evaluation process requirements and process specifications.

This standard applies to the processing and quality inspection bodies dissolved silicon chip technology. Its clauses include terms and definitions.

Found what you need?

Document preview — GB/T 28276-2012

National Standard of the People's Republic of China

ICS
31.200
Classification
L 55

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Process
  • 4.1 bulk silicon melting process sheet
  • 4.2 Wafer Processing Process
  • 4.3 glass process flow
  • 4.4 silicon - glass bonding process flow sheet
  • 5 processing technology skills
  • 6.2 Environmental Requirements
  • 7 6 Raw materials
  • 8 safe operation requires
  • 8.1 Electrical Safety
  • 8.2 Chemicals
  • 8.3 exhaust
  • 9 6 Inspection Process
  • 9.1 General
  • 9.2 Key process inspection
  • 9.3 Final Inspection
  • Appendix A (informative) bulk silicon dissolving tablet key step test method

1 Scope

This standard specifies the use of bulk silicon dissolving tablet technology for MEMS device fabrication process to be followed in the evaluation process requirements and process specifications.

This standard applies to the processing and quality inspection bodies dissolved silicon chip technology.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated edition applies to this article

Member. For undated references, the latest edition (including any amendments) applies to this document.

GB 50073-2001 clean plant design specifications

GB/T 19022-2003 Measurement management systems for measurement processes and measuring equipment

GB/T 26111-2010 micro-electromechanical systems (MEMS) technology terms

3 Terms and Definitions

GB/T 26111-2010 and GB/T 19022-2003 defined and the following terms and definitions apply to this document.

3.1 MEMS micro-electromechanicalsystem; MEMS

Key (part) feature sizes between submicron to submillimeter, optoelectronics and other machines to complete the system functions independently.

Note 1. microelectromechanical systems typically include micro-institutions, micro sensors, micro actuators, signal processing and control, communications interface circuits, and energy components.

Note 2. The micro-electromechanical systems often require multidisciplinary technology applications, a variety of areas such as mechanical, electrical, optical, biological, and other.

Note 3. MEMS mainly in the United States to use micro system is mainly used in Europe, micromechanical mainly used in Japan.

[GB/T 26111-2010, the definition 3.1.1]

3.2 Bulk micro-machined

Achieve micromachined micro structure by selectively removing a portion of the base material.

NOTE. bulk micromachining technology formula chemically etched to remove unnecessary portions of the substrate processing method using SiO2 or SiN mask to protect the table.

Surface is not etched. Boron doped layer may also stop the etching of the surface layer in the following sections.

[GB/T 26111-2010, the definition 3.5.16]

3.3 Bulk silicon dissolving tablet technology

Heavy use of boron-doped silicon anisotropic etchant stop the corrosive effects of self-realization MEMS structure silicon processing technology.

Note. The bulk silicon melting process sheet glass as support material to form a MEMS structure on a heavily doped boron silicon through the use of dry etching by anodic

Bonding technology for sealing between the glass and silicon, and finally an anisotropic etching technique to remove excess silicon to achieve the release of the MEMS structure.

3.4 Etch-stop

Use etchant etching speed difference of different materials such etch stop layer on a particular material.

END: Draft Version (GB/T 28276-2012)

GB/T 46280.2-2025 | GB/T 43770-2024 | GB/T 15651.7-2024 | GB/T 28277-2012 | GB/T 28275-2012 | GB/T 28274-2012 |

Quality Assurance | How to buy PDFs? | FAQ Terms of Service | Contact Information | Privacy Policy | Refund Policy | Shipping Policy […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download GB/T 28276-2012

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 28276-2012

$195.00