Valid

GB/T 28269-2012Zigzag spring for seat - Technical specifications (English PDF)

座椅用蛇形弹簧 技术条件

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 28269-2012 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

May 11, 2012

Implementation date

December 1, 2012

Scope

GB/T 28269-2012 is the English-translated version of 座椅用蛇形弹簧 技术条件.

GB/T 28269-2012 is the Chinese standard "Zigzag spring for seat - Technical specifications". Its scope clause reads: This standard specifies the technical requirements, test methods, inspection rules and marking, packaging for snake springs made of circular cross-section materials, Transport, storage.

This standard applies to the vehicle seat, furniture, seat with a serpentine spring (hereinafter referred to as snake spring). For other seats, furniture with snake spring can be used.

Its clauses include normative reference documents; terms, definitions, codes and units.

Found what you need?

Document preview — GB/T 28269-2012

National Standard of the People's Republic of China

ICS
21.160
Classification
J 26

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions

1 Scope

This standard specifies the technical requirements, test methods, inspection rules and marking, packaging for snake springs made of circular cross-section materials,

Transport, storage.

This standard applies to the vehicle seat, furniture, seat with a serpentine spring (hereinafter referred to as snake spring).

For other seats, furniture with snake spring can be used.

2 normative reference documents

The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article

Pieces. For undated references, the latest edition (including all modifications) applies to this document.

GB/T 1805 spring terminology

GB/T 2828.1 Sampling inspection procedures Part 1. Batch inspection sampling plan for retrieval by quality limit (AQL)

GB/T 4357 cold drawn carbon spring steel wire

YB/T 5220 Carbon spring steel for non - mechanical springs

3 terms, definitions, codes and units

The terms and definitions defined in GB/T 1805 and in Table 1 apply to this document, as shown in Table 1.

Table 1

Term Definition Code Unit width width

Snake spring adjacent two peaks perpendicular to the free length (chord length,

Arc length) direction hs radius radius

The forming radius r of the circular snake spring mm

Peak number crestnumber

Specifies the free length (chord length, arc length) within the reed spring

The number of times of molding ns -

Free arc high freecamber

Snail spring in the no-load when the arc height h0

Free arc length freearclength

The arc length of the snake spring in no load

Free chord length freespan

The chord length L0 of the snake spring in no load

Arcuate, arc-shaped arc radius radiusofarchorarc

The radius of curvature of the spring is perpendicular to the width direction mm

Center distance centerdistance

Rounded snake adjacent to the center of the two peaks half l mm

END: Draft Version (GB/T 28269-2012)

GB/T 34668-2023 | GB/T 34667-2023 | GB/T 1239.2-2009 | GB/T 45870.3-2026 | GB/T 45870.2-2025 | GB/T 45870.1-2025 |

Quality Assurance | How to buy PDFs? | FAQ Terms of Service | Contact Information | Privacy Policy | Refund Policy | Shipping Policy […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 28269-2012

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 28269-2012

$255.00