Valid

GB/T 28207-2011Release base paper (English PDF)

离型原纸

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 28207-2011 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 30, 2011

Implementation date

September 1, 2012

Scope

GB/T 28207-2011 is the English-translated version of 离型原纸.

GB/T 28207-2011 is the Chinese standard "Release base paper". Its scope clause reads: This standard specifies the release paper product classifications, requirements, test methods, inspection rules, marking, packaging, transportation and storage.

This standard applies to paper made after Laminating release paper. Its clauses include product categories; requirements.

Found what you need?

Document preview — GB/T 28207-2011

National Standard of the People's Republic of China

ICS
85.060
Classification
Y 32

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope
  • 2 Normative references
  • 3 Product Categories
  • 4 Requirements

1 Scope

This standard specifies the release paper product classifications, requirements, test methods, inspection rules, marking, packaging, transportation and storage.

This standard applies to paper made after Laminating release paper.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein

Member. For undated references, the latest edition (including any amendments) applies to this document.

Latitude and take samples to GB/T 450 paper and paperboard samples, positive and negative determination

Determination of GB/T 451.1 Paper and board size and skewness

GB/T 451.2 Paper and paperboard quantitative determination

Determination of GB/T 451.3 Paper and cardboard thickness

Determination of GB/T 455-degree tear paper and cardboard

GB/T 456 Determination (Buick method) Paper and cardboard smoothness

Determination of GB/T 458-2008 air permeability of paper and cardboard

GB/T 462 paper, cardboard and moisture measurement sample pulps analysis

GB/T 1540 paper and board Determination of water absorption (Cobb method)

Determination of GB/T 1541-1989 cardboard and paper dust-degree

GB/T 2828.1 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch inspection sampling plan

GB/T 7974 paper, paperboard and pulp brightness (whiteness) measured (diffusion/vertical method)

GB/T 10342 paper packaging and identification

Standard atmospheric conditions GB/T 10739 paper, paperboard and pulp sample processing and testing

Determination of GB/T 12914 Paper and cardboard tensile strength

3 Product Categories

Press release base paper quality divided into superior products and quality products.

4 Requirements

4.1

release base paper technical indicators should be consistent with Table 1 or order contract provisions.

4.2

release base paper web.

4.3

width of the roll and roll diameter comply with the order contract, the width deviation should not exceed ± 3mm.

4.4

should be closely roll, full width elastic should be consistent, end should be smooth and should not be involved in the roll paper or scraps of paper and other debris, trimming paper should not

Burrs, jagged and cracks.

4.5

Each roll of the number of joints superior product should not more than one qualified products should not be more than 2, an adhesive tape to joints and have clearly marked

Knowledge, the joint width should not exceed 50mm.

END: Draft Version (GB/T 28207-2011)

GB/T 26174-2023 | GB/T 22869-2020 | GB/T 24695-2009 | GB/T 13023-2026 | GB/T 28210-2024 | GB/T 28210-2011 |

Quality Assurance | How to buy PDFs? | FAQ Terms of Service | Contact Information | Privacy Policy | Refund Policy | Shipping Policy […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 28207-2011

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 28207-2011

$85.00