GB/T 28200-2011Technical requirements and test methods of steeliness storage units (rack) (English PDF)
钢制储物柜（架）技术要求及试验方法
This is a limited preview
Buy now to download the full PDF (18 pages)
Need quotation for your management?
Get a formal quotation for GB/T 28200-2011 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 30, 2011
Implementation date
September 1, 2012
Scope
GB/T 28200-2011 is the English-translated version of 钢制储物柜（架）技术要求及试验方法.
GB/T 28200-2011 is the Chinese standard "Technical requirements and test methods of steeliness storage units (rack)". Its scope clause reads: This standard specifies the terms and definitions steel lockers (frame), product classification, requirements, test methods, inspection rules and the use of said Ming, packaging, transportation and storage.
This standard applies to steel as the main material is made, each load of no more than 500kg lockers (frame) products. This standard does not apply to have frozen, fresh, high and low temperature and other functions can be adjusted or similar container products. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 28200-2011
National Standard of the People's Republic of China
- ICS
- 97.140
- Classification
- Y 81
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Product Category
- 5 requires
- 6 Test methods
- 7 Inspection rules
- 8 use, packaging, transportation and storage
- Appendix A (informative) Categories schematic
- Annex B (informative) products opening size
- Annex C (normative) no express requirements for products are generally carry
1 Scope
This standard specifies the terms and definitions steel lockers (frame), product classification, requirements, test methods, inspection rules and the use of said
Ming, packaging, transportation and storage.
This standard applies to steel as the main material is made, each load of no more than 500kg lockers (frame) products.
This standard does not apply to have frozen, fresh, high and low temperature and other functions can be adjusted or similar container products.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 1732 Determination of impact resistance of film
GB/T 2828.1 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch inspection sampling plan
GB/T 3325-2008 Metal furniture general technical conditions
GB/T 4893.1 furniture surface resistance to cold liquids assay
GB/T 4893.2 furniture surface resistance to wet heat
GB/T 4893.3 furniture surface resistance to dry heat assays
GB/T 4893.4 furniture surface film cross-cut adhesion assay
GB/T 4893.7 furniture surface resistance to heat and cold assay
GB/T 4893.8 Determination of the furniture surface paint wear
GB/T 4893.9 Determination of furniture surface resistance to impact
GB 5296.6 consumer use - Part 6. Furniture
GB/T 6739-2006 Determination of film hardness by pencil test paints and varnishes
Cut test GB/T 9286 Paints and varnishes
GB/T 9754 Paints and varnishes contain metallic paint films of 20 °, 60 ° and 85 ° specular gloss measurement
GB/T 10357.5 furniture mechanical properties test - Part 5. Strength and durability of cabinet
GB/T 13667.1-2003 steel shelves General technical conditions
GB/T 17657-1999 panels and veneer plywood physical and chemical performance test method
QB/T 3814-1999 Test Method Appearance quality light industrial products metal plating and chemical treatment layer
QB/T 3826-1999 light industrial products metal coating and corrosion test methods for neutral salt spray test chemical treatment layer (NSS) method
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1 Steel lockers (frame) steelinessstorageunits (rack)
Cabinet or rack supermarkets, shops, offices, laboratories, showrooms, bedroom and other places used by one or a set of steel used to store items
Products, the main components shown in Figure 1.
END: Draft Version (GB/T 28200-2011)
GB/T 32446-2024 | GB/T 22793-2022 | GB/T 39019-2020 | GB/T 48090-2026 | GB/T 46014-2025 | GB/T 26706-2025 |
Quality Assurance | How to buy PDFs? | FAQ Terms of Service | Contact Information | Privacy Policy | Refund Policy | Shipping Policy […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 18 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 28200-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 28200-2011
$315.00