GB/T 28120-2011Paper sacks for flour (English PDF)
面粉纸袋
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 28120-2011 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 30, 2011
Implementation date
August 1, 2012
Scope
GB/T 28120-2011 is the English-translated version of 面粉纸袋.
GB/T 28120-2011 is the Chinese standard "Paper sacks for flour". Its scope clause reads: This standard specifies the classification of flour bags, specifications, marking, technical requirements, test methods, inspection rules, marking, packaging, transport and Storage.
This standard applies to all kinds of load mass does not exceed 25kg bag of flour, it is also applicable to similar relative density and flour Powdered foods and food additives, paper bags and other packaging. Its clauses include classification, size and marking.
Found what you need?
Document preview — GB/T 28120-2011
National Standard of the People's Republic of China
- ICS
- 85.080
- Classification
- Y 33
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 classification, size and marking
- 3.1 Classification
1 Scope
This standard specifies the classification of flour bags, specifications, marking, technical requirements, test methods, inspection rules, marking, packaging, transport and
Storage.
This standard applies to all kinds of load mass does not exceed 25kg bag of flour, it is also applicable to similar relative density and flour
Powdered foods and food additives, paper bags and other packaging.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 191 Packaging - Pictorial signs
GB/T 2828.1 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch inspection sampling plan
GB/T 4857.5 packaging transport package drop test methods
GB/T 5009.60 food packaging, polyethylene, polystyrene, polypropylene moldings health standard analytical methods of
GB/T 5009.78 Method for analysis of food packaging Paper health standards
GB 9685 food containers and packaging materials additives health standards
GB 9687 food packaging polyethylene moldings health standards
Standard atmospheric conditions GB/T 10739 paper, paperboard and pulp sample processing and testing
GB 11680 standard for food packaging Paper health
GB/T 16491 electronic universal testing machine
3 classification, size and marking
3.1 Classification
Flour bag according to the loading mass divided into large and small packaging categories. Bulk bag type with a hexagonal bottom flat side pasting open pocket, flipped
Paste and opened the bottom hem pockets, double rollover papered bottom hem reinforcement and opened pocket or hexagonal ends of the flat side pasting valve pockets; bag type with a small package
Rectangular bottom hem pasting open pocket. Orders can also use other contract pouch type. Bulk and small packaging pouch type as follows.
3.1.1 hexagonal flat bottom edge pasting open pocket
Hexagonal bottom flat edge pasting opening pocketed both sides of the flat side of the body, the bottom surface of the adhesive into a flat hexagon, typical pouch-type diagram shown in Figure 1
Shown. Usually three or hyperextension Sack Sack manufacturing, trapezoidal bonding method is adopted between each independently bonded layers paste sticky point
Together.
3.1.2 Flip open pocket bottom hem pasting
Flip bottom hem pasting opening pocketed both sides of the body has ruffles bag tube ends with a stepped cutting method cutting, hot melt adhesive to the bottom surface of the bottom of the stick flip
Together, the mouth is coated with hot melt adhesive, typical pouch-type schematic diagram shown in Figure 2. Usually three or hyperextension Sack Sack manufacturing, trapezoidal
Bonding method, the bonding between each layer independently, the layers are bonded together using the paste point.
END: Draft Version (GB/T 28120-2011)
GB/T 26174-2023 | GB/T 27590-2022 | GB 31604.39-2016 | GB/T 27591-2025 | GB/T 44833-2024 |
Quality Assurance | How to buy PDFs? | FAQ Terms of Service | Contact Information | Privacy Policy | Refund Policy | Shipping Policy […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 28120-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 28120-2011
$195.00