GB/T 44833-2024Paper straw (including straw base paper) (English PDF)

1 Scope

This document defines the terms and definitions of paper straws (including straw base paper), and stipulates the requirements, inspection rules, marking, packaging, transportation, and other aspects of paper straws.

transport and storage, describes the corresponding test methods, and gives information on classification.

This document applies to the production, inspection and

Sale.

2 Normative references

The contents of the following documents constitute the essential clauses of this document through normative references in this document.

For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to

This document.

GB/T 450 Paper and paperboard test specimens and determination of longitudinal and transverse, front and back surfaces of specimens

GB/T 451.1 Paper and board - Determination of size and skewness

GB/T 451.2 Paper and board Part 2.Determination of quantitative

GB/T 451.3 Paper and board - Determination of thickness

GB/T 456 Paper and board - Determination of smoothness (Buick method)

GB/T 462 Paper, paperboard and pulp analysis samples - Determination of moisture content

GB/T 465.2 Paper and paperboard - Determination of tensile strength after immersion in water

GB/T 1040.3 Plastics - Determination of tensile properties - Part 3.Test conditions for films and sheets

GB/T 1540 Paper and board - Determination of water absorption - Cobb method

GB/T 1541 Paper and paperboard - Determination of dustiness

GB/T 2828.1 Sampling procedures for inspection by attributes Part 1.Sampling plans for batch inspection based on acceptance quality limit (AQL)

GB/T 6672 Plastic film and sheeting - Determination of thickness - Mechanical measurement method

GB/T 7974 Paper, paperboard and pulp - Determination of blue light diffuse reflectance D65 brightness (diffuse/vertical method, outdoor daylight conditions)

GB/T 10342 Packaging and marking of paper

GB/T 10739 Standard atmospheric conditions for the preparation and testing of paper, paperboard and pulp samples

GB/T 12914 Paper and board—Determination of tensile strength—Constant rate of tension (20 mm/min)

GB/T 22365-2008 Paper and board - Determination of printed surface strength

GB/T 36392 Laminated paper and paperboard for food packaging

GB/T 39951 Evaluation method for the degradation performance of disposable paper products

GB/T 44834 Water-based coated paper and paperboard for food packaging

QB/T 1020 Standard inks for test of printability of paper and paperboard

3 Terms and Definitions

The following terms and definitions apply to this document. […]