GB/T 28117-2011Multi-layer co-extrusion films and pouches for food packaging (English PDF)
食品包装用多层共挤膜、袋
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 28117-2011 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 30, 2011
Implementation date
August 1, 2012
Scope
GB/T 28117-2011 is the English-translated version of 食品包装用多层共挤膜、袋.
GB/T 28117-2011 is the Chinese standard "Multi-layer co-extrusion films and pouches for food packaging".
Its scope clause reads: This standard specifies the materials, terminologies, definitions, abbreviations, symbols, classification, requirements, test methods, inspection rules, marking, packaging, transportation and storage of multi-layer co-extrusion films and pouches for food packaging.
This standard is applicable to the multi-layer non-printed films and pouches with thickness of 0.30mm and used for food packaging which is produced with food-packaging resin through co-extrusion process. Its clauses include terminologies, definitions, abbreviations and symbols.
Found what you need?
Document preview — GB/T 28117-2011
National Standard of the People's Republic of China
- ICS
- 83.140.10
- Classification
- G 32
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword I
- 1 Scope
- 2 Normative References
- 3 Terminologies, Definitions, Abbreviations and Symbols
- 4 Classification
- 5 Requirements
- 6 Test Methods
- 7 Inspection Rules
- 8 Marking, Packaging, Transportation and Storage
1 Scope
This standard specifies the materials, terminologies, definitions, abbreviations, symbols, classification, requirements, test methods, inspection rules, marking, packaging, transportation and storage of multi-layer co-extrusion films and pouches for food packaging.
This standard is applicable to the multi-layer non-printed films and pouches with thickness of 0.30mm and used for food packaging which is produced with food-packaging resin through co-extrusion process.
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the normative document (including any amendments) applies.
GB/T 191 Packaging - Pictorial Marking for Handling of Goods
GB/T 1037 Test Method for Water Vapor Transmission of Plastic Film and Sheet - Cup Method
GB/T 1038 Plastics - Film and Sheeting - Determination of Gas Transmission - Differential-pressure Method
GB/T 1040.3 Plastics - Determination of Tensile Properties - Part 3: Test Conditions for Films and Sheets
GB/T 2410 Determination of the Luminous Transmittance and Haze of Transparent Plastics
GB/T 2828.1 Sampling Procedures for Inspection by Attributes - Part 1: Sampling Schemes Indexed by Acceptance Quality Limit (AQL) for Lot-by-lot Inspection
GB/T 2918 Plastics - Standard Atmospheres for Conditioning and Testing
GB/T 5009.60 Method for Analysis of Hygienic Standard of Products of Polyethylene Polystyrene and Polypropyrene for Food Packaging
GB/T 6672 Determination of Thickness of Plastic Film and Sheeting by Mechanical Scanning
GB/T 6673 Determination of Length and Width of Plastics Film and Sheeting
GB/T 8808 Test Method for Peel Force of Flexible Laminated Plastics
GB/T 9639.1 Plastics Film and Sheeting - Determination of Impact Resistance by the Free-falling Dart Method - Part 1: Staircase Methods
GB 9685 Hygienic Standards for Uses of Additives in Food Containers and Packaging Materials
GB 9687 Hygienic Standard of Products of Polyvinyl Chloride for Food Packaging
GB 9688 Hygienic Standard for Polypropyrene Products Used as Food Containers and Tablewares
GB/T 21302 General Rules of Laminated Films & Pouches for Packaging
QB/T 1130 Test Method for Plastics Angle Tear Performance
QB/T 2358 Test Method for the Heat Sealing Strength of Plastic-film Packaging Bag
3 Terminologies, Definitions, Abbreviations and Symbols
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 28117-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 28117-2011
$85.00