Valid

GB/T 28048-2011Code for acceptance of quality of sound reinforcement system of auditorium gymnasium and stadium (English PDF)

厅堂、体育场馆扩声系统验收规范

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 28048-2011 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

October 31, 2011

Implementation date

February 1, 2012

Scope

GB/T 28048-2011 is the English-translated version of 厅堂、体育场馆扩声系统验收规范.

GB/T 28048-2011 is the Chinese standard "Code for acceptance of quality of sound reinforcement system of auditorium gymnasium and stadium". Its scope clause reads: This standard specifies the basic requirements and methods for quality sound reinforcement systems engineering acceptance.

This standard applies to the hall, sound reinforcement systems engineering quality acceptance stadiums relatively fixed installation, the other with fixed installation sound system The place can be implemented by reference. Its clauses include terms and definitions.

Found what you need?

Document preview — GB/T 28048-2011

National Standard of the People's Republic of China

ICS
33.160.99
Classification
M 72

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 2 PA system acceptance criteria
  • 5 PA System Acceptance organization and responsibilities
  • 6 sound system to detect the acoustic characteristics of indicators
  • 7 PA system construction inspection
  • 8 PA system technology acceptance
  • 10 sound system inspection and rectification conclusions

1 Scope

This standard specifies the basic requirements and methods for quality sound reinforcement systems engineering acceptance.

This standard applies to the hall, sound reinforcement systems engineering quality acceptance stadiums relatively fixed installation, the other with fixed installation sound system

The place can be implemented by reference.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein

Member. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 4959-2011 Hall Reinforcement Characteristic Measurement

GB/T 28047-2011 hall, stadium PA system listening evaluation method

GB 50198-1994 Civil CCTV systems engineering technical specifications

JGJ/T 131-2000 Gymnasium acoustic design and measurement procedures

3 Terms and Definitions

The following terms and definitions apply to this document.

3.1 Hall auditorium

To view and play session for the main use of functional buildings, including theaters, concert halls, opera houses, multi-purpose hall, conference hall.

3.2 Stadiums

Primarily for sports competitions and other activities indoor and outdoor spaces to use.

3.3 PA system

PA system including system devices sound field environment. Main process. the sound source signals into electrical signals, amplified, processed, transmitted

Lose, and then restore the sound field environment and services; main components. a microphone, a sound source equipment, mixers, signal processors, audio power

Amplifiers and speaker systems.

3.4 Maximum SPL

After the completion of the PA system debugging, the steady-state maximum sound pressure level at each measuring point the audience area generated average. The maximum sound pressure level can be used

RMS SPL test specified crest factor signal, peak or quasi-peak SPL SPL representation.

3.5 Maximum available gain state

PA system in the critical state of self-excited acoustic feedback gain minus 6dB of gain time.

3.6 Transmission frequency characteristic

PA system in a steady state, the average area of each measurement point steady audience of sound pressure with respect to the sound pressure at the microphone sound system

Or sound equipment input voltage amplitude frequency response.

END: Draft Version (GB/T 28048-2011)

GB/T 25102.7-2017 | GB/T 14471-2013 | GB/T 25102.13-2010 | GB/T 28047-2026 | GB/T 28049-2011 | GB/T 28047-2011 |

Quality Assurance | How to buy PDFs? | FAQ Terms of Service | Contact Information | Privacy Policy | Refund Policy | Shipping Policy […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 28048-2011

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 28048-2011

$195.00