GB/T 28047-2011Method of listening evaluation of sound reinforcement of auditorium gymnasium and stadium (English PDF)
厅堂、体育场馆扩声系统听音评价方法
This is a limited preview
Buy now to download the full PDF (16 pages)
Need quotation for your management?
Get a formal quotation for GB/T 28047-2011 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
October 31, 2011
Implementation date
February 1, 2012
Scope
GB/T 28047-2011 is the English-translated version of 厅堂、体育场馆扩声系统听音评价方法.
GB/T 28047-2011 is the Chinese national standard covering method of listening evaluation of sound reinforcement of auditorium gymnasium and stadium. It was issued on 31 October 2011 and has been in force since 1 February 2012, as a first edition.
The document is under the responsibility of the Ministry of Industry and Information Technology. This page is published from the official record of the 2011 edition.
The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.
Found what you need?
Document preview — GB/T 28047-2011
National Standard of the People's Republic of China
- ICS
- 33.160.99
- Classification
- M 72
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- [Preview only]
- 1 Scope
- 1.2 Normative References
- 1.3 Picture types
- 2.1 Definitions
- 2.2 Types of Receivers
- 2.3 Peripheral Connectors
- 2.4 Measurements
- 2.5 Equipment classification
- 2.6 Receiver and transmitter
- 2.7 Power controls and supply network impedances
- 2.8 Voltage change and flicker
- 2.9 Plastic pipes and fittings
- 3 1 test device
- 3.1 General Conditions
- 3.2 Test Signals
- 3.3 Radiofrequency (r.f.) Television Signal
- 3.4 Radiofrequency Input Signals
- 3.5 Measuring System and Test Instruments
- 3.6 Standard Measuring Conditions
- 4 Sample 1 and Sample Preparation
- 4.1 Electrical and Mechanical Performance
- 4.2 Power Consumption
- 4.3 REQUEST/RESPOND ser vice
- 5 Test Procedure 2
- 5.1 Tuning Characteristics
- 5.2 Sensitivity
- 5.3 Selectivity and Response to Undesired Signals
- 5.4 Cement mortar
- 6 2 eligibility criteria
- 6.1 Characteristics of the Luminance Channel
- 6.2 Characteristics of Chrominance Channel
- 6.3 Balanced transmission procedures
- 6.4 Manhole (handhole) overlay and tunnel trench cover slab
- 6.5 Hole rings and covers
- 7 Results
- 7.1 General Properties of the Picture
- 7.2 Synchronizing Quality
- 7.3 Picture Size Stability Versus Changes of CRT Beam Current
- 7.4 Characteristics Inherent in Projection Type Displays
- 7.5 Characteristics Inherent in DCD Displays
- 7.6 Characteristics Inherent in Widescreen Displays
- 8 Characteristics Inherent in the Receivers Using Double-rate Scan Display
- 8.1 General
- 8.2 Preliminary acceptance
- 8.3 Final acceptance
- 9 Disturbance on the Picture Due to Signals Inserted into the Field Blanking Interval
- 9.1 Introduction
- 9.2 Method of Measurement
- 9.3 Presentation of Results
1 Foreword
GB/T 28047-2011 was issued by State Administration for Market Regulation; Standardization Administration of the PRC on 31 October 2011 and has been in force since 1 February 2012.
The GB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 16 pages in English translation.
2 Scope Preview
GB/T 28047-2011 falls under ICS 33.160.99, in the field of telecommunications.
This catalogue holds 1,124 other GB/T standards in that field.
In this catalogue, GB/T standards carry edition years from 1963 to 2026.
3 About this standard
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
English translation: about 16 pages
4 Related standards
Other editions:
GB/T 28047-2026 (later edition)
Standards on related subjects:
GB/T 25102.7-2017 — Electroacoustics -- Hearing aids -- Part 7: Measurement of the performance characteristics of hearing aids for production, supply and delivery quality assurance purposes
GB/T 14471-2013 — General specification for headphones
GB/T 25102.13-2010 — Electroacoustics -- Hearing aids -- Part 13: Electromagnetic compatibility (EMC)
GB/T 28049-2011 — Code for sound reinforcement system design of auditorium, gymnasiums and stadium
GB/T 28048-2011 — Code for acceptance of quality of sound reinforcement system of auditorium gymnasium and stadium
5 Classification and status
International classification (ICS): 33.160.99
Chinese Standard Classification (CCS): M 72
Prefix GB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 16 pages — is available in the English PDF.
Similar standards
How to Download GB/T 28047-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 28047-2011
$285.00