Valid

GB/T 28030-2011Earth continuity tester (English PDF)

接地导通电阻测试仪

Preview PDF

This is a limited preview

Buy now to download the full PDF (26 pages)

Need quotation for your management?

Get a formal quotation for GB/T 28030-2011 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

October 31, 2011

Implementation date

February 1, 2012

Scope

GB/T 28030-2011 is the English-translated version of 接地导通电阻测试仪.

GB/T 28030-2011 is the Chinese standard "Earth continuity tester". Its scope clause reads: This standard specifies the ground bond tester (hereinafter referred to as the tester) the terms and definitions, requirements, test methods, inspection rules, marking Chi, packaging, transportation and storage.

This standard applies to analogue and digital AC/DC Ground-resistance tester, is also applicable to both the measurement of other parameters of the instrument connected Ground resistance measuring section.

This standard is not used to measure the resistance between the grounding conductor and the earth and the earth resistance meter ground resistance meter similar purposes.

Found what you need?

Document preview — GB/T 28030-2011

National Standard of the People's Republic of China

ICS
17.220.20
Classification
N 25

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Introduction
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Category
  • 5 requires
  • 5.1 Technical Requirements
  • 6 5.2 Functional requirements
  • 5.3 appearance and structure
  • 5.4 measuring line/spring
  • 5.5 terminal button, socket
  • 5.6 Noise
  • 5.7 Environmental Adaptability
  • 5.8 Electrical requirements
  • 5.9 Reliability
  • 6 Test methods
  • 6.1 Test conditions
  • 6.2 General inspection
  • 6.3 Accuracy test
  • 6.4 Function test
  • 6.5 Effect of the amount of test
  • 6.6 Environmental Adaptability Test
  • 6.7 Electrical Performance Test
  • 6.8 Electromagnetic compatibility tests (EMC)
  • 6.9 Reliability Test
  • 7 Inspection rules
  • 7.1 factory inspection
  • 7.2 Type inspection
  • 7.3 in-service inspection
  • 7.4 Type inspection sampling plan
  • 7.5 determine the rules
  • 7.6 Test item
  • 8 signs, packaging, transportation and storage
  • 8.1 Marking
  • 8.2 20 random file
  • 8.3 Packaging, transportation and storage
  • Appendix A (normative) 21 indicates the maximum permissible error
  • Annex B (informative) Test sequence
  • Annex C (informative) Measurement line/spring DC Resistance Test Method
  • References

1 Scope

This standard specifies the ground bond tester (hereinafter referred to as the tester) the terms and definitions, requirements, test methods, inspection rules, marking

Chi, packaging, transportation and storage.

This standard applies to analogue and digital AC/DC Ground-resistance tester, is also applicable to both the measurement of other parameters of the instrument connected

Ground resistance measuring section.

This standard is not used to measure the resistance between the grounding conductor and the earth and the earth resistance meter ground resistance meter similar purposes.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein

Member. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 191-2008 Packaging - Pictorial signs (ISO 780.1997, MOD)

GB/T 2423.1-2008 Environmental testing for electric and electronic products Part 2. Test methods Test A. Cold (IEC 60068-2-

1.2007, IDT)

GB/T 2423.2-2008 Environmental testing for electric and electronic products Part 2. Test methods Test B. Dry heat (IEC 60068-2-

2.2007, IDT)

GB/T 2423.4-2008 Environmental testing for electric and electronic products Part 2. Test methods - Test Db alternating hot and humid (12h

12h cycle) (IEC 60068-2-30.2005, IDT)

GB/T 2423.5-1995 Environmental testing for electric and electronic products Part II. Test methods - Test Ea and guidance. Shock (Idt IEC 60068-2-27. 1987)

GB/T 2423.10-2008 Environmental testing for electric and electronic products Part 2. Test methods Test Fc. Vibration (sinusoidal) (IEC 60068-2-6.1995, IDT)

GB/T 2900.77-2008 Electrotechnical terminology - Electrical and electronic measuring instruments - Part 1. General term measurements (IEC 60050 (300-311).2001, IDT)

GB/T 4208-2008 housing protection (IP Code) (IEC 60529.2001, IDT)

GB/T 4793.1-2007 measurement, control and laboratory safety requirements for electrical equipment - Part 1. General requirements (IEC 61010-1.2001, IDT)

GB 6587.6-1986 electronic measuring instruments test transport

GB 6587.8-1986 electronic measuring instruments and power frequency voltage test

GB/T 6593-1996 quality inspection rules for electronic measuring instruments

GB 9969-2008 General Industrial Product Manual

GB 11463-1989 reliability tests for electronic measuring instruments

GB/T 16511-1996 Electrical and electronic measuring equipment - Documentation (idt IEC 1187-1993)

GB/T 18268-2000 measurement, control and laboratory electrical equipment, electromagnetic compatibility requirements (idt IEC 61326-1.1997) […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 26 pages — is available in the English PDF.

Similar standards

How to Download GB/T 28030-2011

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
26 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 28030-2011

$465.00