Valid

GB/T 28016-2011Gold alloy jewellery - Determination of gold - Gravimetric method (English PDF)

金合金首饰 金含量的测定 重量法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 28016-2011 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

October 31, 2011

Implementation date

February 1, 2012

Scope

GB/T 28016-2011 is the English-translated version of 金合金首饰 金含量的测定 重量法.

GB/T 28016-2011 sets out the gravimetric method for determining the gold content of gold alloy jewellery.

Clause 1 applies it to the determination of gold contents from 700.0 per mille to 999.5 per mille in gold alloy jewellery and related products, and excludes gold alloy products that contain platinum, palladium, rhodium or other precious metal elements.

Clause 2 states the principle of the method: the sample is dissolved in aqua regia so that the metals pass into compounds, the gold is then reduced to elemental gold with hydrazine hydrate under acidic conditions, and the gold content is obtained by weighing, the two reaction equations printed in the draft being too garbled to reproduce.

Clause 3 lists the reagents, hydrochloric acid of mass fraction 36 per cent to 38 per cent and density 1.19 g/mL, nitric acid of mass fraction 65 per cent to 68 per cent and density 1.40 g/mL, aqua regia and a dilute nitric acid prepared from them in ratios the draft has lost, and hydrazine hydrate, all to be used with analytical reagent grade materials and secondary distilled water.

Clause 4 lists the apparatus, including an analytical balance reading to 0.1 mg, an electric hot plate, a vacuum pump, a metal press, a muffle furnace, quantitative filter paper, precision pH test paper for pH 4.0 to 7.0, Buchner funnels of 100 mL and 250 mL, suction bottles of 250 mL and 500 mL, beakers of 250 mL and 500 mL, a dryer and a 25 mL porcelain crucible.

The draft stops at the end of clause 4, so the procedure, the calculation and the precision provisions are not visible. The page puts the standard forward from the China National Light Industry Council, places it with the national jewelry standardization technical committee SAC/TC256, and warns that some of its content may involve patents. It was issued on 31 October 2011 and has applied since 1 February 2012.

Found what you need?

Document preview — GB/T 28016-2011

National Standard of the People's Republic of China

ICS
39.060
Classification
Y 88

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword
  • 1 Scope
  • 2 Principle of the method
  • 3 Reagents
  • 4 Equipment

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules.

Please note that some of the content of this document may involve patents. Distribution of this document Institutions do not assume the responsibility to identify these patents.

The standard proposed by China National Light Industry Council.

This standard by the National Standardization Technical Committee jewelry (SAC/TC256) centralized.

This standard was drafted. Tianjin Institute of Geology Steel Group Co., Ltd.

1 Scope

This standard specifies the use of gold jewelery alloys - Gravimetric method for gold content.

This standard applies to the determination of gold content of 700.0 per thousand ~ 999.5 per thousand gold alloy jewelry and related products.

This standard does not apply to the determination of gold alloy products containing platinum, palladium, rhodium and other precious metal elements.

2 Principle of the method

Gold alloy sample was dissolved in aqua regia, the metal is converted to elemental state state of the metal compounds, under acidic conditions, the compound with hydrazine hydrate state Gold reduced to elemental gold, and the gold content of the sample by weighing. Reaction is as follows.

Au HNO3 4HCl -> HAuCl4 NO -> 2H2O 2HAuCl4 6N2H4 . H2O -> 2Au -> 6NH4Cl 3N2 -> 2HCl 6H2O

3 Reagents

Unless otherwise indicated in the analysis using only recognized as analytical reagent and secondary distilled water.

3.1 Hydrochloride, mass fraction of 36% ~ 38%, rho = 1.19g/mL.

3.2 Nitric acid, mass fraction of 65% ~ 68%, rho = 1.40g/mL.

3.3 Aqua regia, nitric acid (3.2) HCl (3.1) = 13.

3.4 Nitric acid, (15).

3.5 Hydrazine hydrate.

4 Equipment

4.1 Analytical balance, a sense of the amount of 0.1mg.

4.2 Electric hot plate.

4.3 Vacuum pump.

4.4 Metal press.

4.5 Muffle furnace.

4.6 Quantitative filter paper.

4.7 Precision pH test paper. pH4.0 ~ 7.0.

4.8 Buchner funnel. 100mL, 250mL.

4.9 Suction bottle. 250mL, 500mL.

4.10 Beaker. 250mL, 500mL.

4.11 Dryer.

4.12 Porcelain crucible. 25mL.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 28016-2011

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 28016-2011

$85.00