GB/T 27959-2011Low temperature disaster of southern rice,rapeseed and orange (English PDF)
南方水稻、油菜和柑桔低温灾害
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 27959-2011 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 30, 2011
Implementation date
March 1, 2012
Scope
GB/T 27959-2011 is the English-translated version of 南方水稻、油菜和柑桔低温灾害.
GB/T 27959-2011 defines low temperature disasters of southern rice, rapeseed and citrus. It specifies how these cold damage disasters are classified and graded.
The terms clause defines air temperature, extreme minimum temperature, low temperature disaster, low temperature disaster types, chilling injury and chilling, and a further clause deals with cold damage to rice, including late spring cold.
It is used by meteorology, agriculture, statistics and civil affairs departments at all levels for monitoring, forecasting, assessing and issuing warnings of low temperature disasters.
The foreword notes that the standard was proposed by the China Meteorological Administration. Issued on 30 December 2011 and applicable from 1 March 2012. The record shows it does not replace any earlier edition, so it is a standalone document.
Found what you need?
Document preview — GB/T 27959-2011
National Standard of the People's Republic of China
- ICS
- 07.060
- Classification
- A 47
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Terms and Definitions
- 3 Rice Cold Damage
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules. The standard proposed by the China Meteorological Administration.
1 Scope
This standard specifies the southern rice, rapeseed, citrus cryogenic hazards disaster classification and grading.
This standard applies to all levels of meteorology, agriculture, statistics, civil affairs departments to low temperature disaster monitoring, forecasting and assessment of alarms and release.
2 Terms and Definitions
The following terms and definitions apply to this document.
2.1 Temperature air
It indicates the degree of physical quantities of hot and cold air.
Note: The meteorological observation temperature is measured at a height of 1.50m from the ground.
2.2 Extreme minimum temperature
Lowest temperatures within a certain period of time.
2.3 Low temperature disaster
Temperatures occurring within a certain region is significantly lower period, and an agricultural meteorological disasters affect normal growth and development of the crop.
2.4 Low hazard types low temperature disaster types
Including cold damage, chilling, frost and freezing four.
2.5 Chilling injury cold injury
Important stage in the crop growing season, warmer than the low growth period required (but still above 0 °C), causing crop developmental delay Late, physiological functions or to damage the reproductive organs, causing agricultural production of low temperature disasters.
2.6 Chilling chi ling injury
SOUTH experience the following tropical crops above 10 °C 0 °C low temperature the plants wilt, rot susceptible or until death, is actually a Chilling injury.
3 Rice Cold Damage
3.1 Late spring
Early rice planting seedlings to ten days during the ten-day average temperature below the annual average of 2 °C or more, and less than ten days before the average temperature, the Ten days of late spring. Late spring class is divided into three levels.
1) mild late spring. -2 °C > delta Ti > -3.5 °C, and Ti (average) \u003cTi-1();
2) Medium late spring. -5.0 °C < delta Ti<=-3.5 °C, and Ti (average) \u003cTi-1();
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 27959-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 27959-2011
$105.00