Valid

GB/T 27583-2011Optical functional films - Determination of reflected glare (English PDF)

光学功能薄膜 反射眩光性能测试方法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 27583-2011 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 5, 2011

Implementation date

March 1, 2012

Scope

GB/T 27583-2011 is the English-translated version of 光学功能薄膜 反射眩光性能测试方法.

GB/T 27583-2011 is the Chinese standard "Optical functional films - Determination of reflected glare". Its scope clause reads: This standard specifies the method of optical film reflected glare film performance testing.

This standard applies to optical polyethylene terephthalate (PET) film, cellulose triacetate (TAC) film and optical PET Film, TAC film to the substrate of the functional film performance tests reflected glare. Its clauses include instrument.

Found what you need?

Document preview — GB/T 27583-2011

National Standard of the People's Republic of China

ICS
71.080.99
Classification
G 15

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope
  • 2 Instrument
  • 2.1 Structure
  • 2.2 Measuring Instruments schematic
  • 2.3 intensity measuring principle

1 Scope

This standard specifies the method of optical film reflected glare film performance testing.

This standard applies to optical polyethylene terephthalate (PET) film, cellulose triacetate (TAC) film and optical PET Film, TAC film to the substrate of the functional film performance tests reflected glare.

2 Instrument

2.1 Structure

When using the He-Ne laser, the output power of 2mW ~ 3mW, the divergence angle is smaller than 1.0 Mrad, the measured arrival film. 2.1.1 Laser

Spot diameter should be less than 2.0mm.

2.1.2 Test Bench film (clip table)

the film should be tested to ensure smooth, stable, and self-reflection does not produce light.

2.1.3 Imaging screen

an imaging screen surface should be uniform, non-selective absorption, no specular reflection, transmission should be between 40% and 60%.

2.1.4

angle laser light emitted light incident on the imaging screen should be 20 °. Between the film and the imaging screen test station distance

200mm.

2.1.5 optical receiver

You can use any type of receiver should be able to measure the imaging screen to partition spatial resolution to ensure measurement accuracy

Degrees, the relative intensity to give an accurate reflection.

2.2 Measuring Instruments schematic

Measuring instrument is shown in Figure 1.

Figure 1 a schematic view of the measuring instrument

2.3 intensity measuring principle

Use optical receiver to obtain light intensity data for Figures 2, 3 light intensity analysis done by Figs. 2 and 3 do light intensity and position from the left to the right

Graph.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 27583-2011

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 27583-2011

$90.00