GB/T 27476.3-2014Safety in testing laboratories - Part 3: Mechanical aspects (English PDF)
检测实验室安全 第3部分：机械因素
This is a limited preview
Buy now to download the full PDF (20 pages)
Need quotation for your management?
Get a formal quotation for GB/T 27476.3-2014 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 5, 2014
Implementation date
December 15, 2014
Scope
GB/T 27476.3-2014 is the English-translated version of 检测实验室安全 第3部分：机械因素.
GB/T 27476.3-2014 is the Chinese standard "Safety in testing laboratories - Part 3: Mechanical aspects". Its scope clause reads: This section GB/T 27476 specifies the safety requirements for testing laboratories (hereinafter referred to as laboratory) and mechanical factors related.
This section applies to testing laboratories, calibration and research laboratories can refer to use. This section applies to a fixed place in the laboratory, the His laboratory premises can refer to use, but may require additional requirements. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 27476.3-2014
National Standard of the People's Republic of China
- ICS
- 13.100
- Classification
- C 78
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Safety management requirements
- 5 Safety requirements
- 5.1 hazard identification and risk assessment
- 5.2 3 persons
- 5.3 Accommodation and environmental
- 5.4 device
- 5.5 Detection
- 5.6 Material
- References
1 Scope
This section GB/T 27476 specifies the safety requirements for testing laboratories (hereinafter referred to as laboratory) and mechanical factors related.
This section applies to testing laboratories, calibration and research laboratories can refer to use. This section applies to a fixed place in the laboratory, the
His laboratory premises can refer to use, but may require additional requirements.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB 1002 Household and similar single-phase plugs and socket type, basic parameters and dimensions
GB 1003 Household and similar three-phase plug and socket type, basic parameters and dimensions
Safety GB 3883 (all parts), hand-held power tools
GB/T 5023.1 rated voltage of 450/750V and below PVC insulated cables - Part 1. General requirements
GB 7144 cylinders color logo
Basic identification colors GB 7231 industrial piping, identifying symbols and safety identification
GB 8965.2 protective clothing flame retardant protection - Part 2. Welding clothes
GB/T 12624 Hand protection General technical requirements and test methods
GB 13960 (all parts), Safety of transportable electric tools
GB 14866 personal eye protectors technical requirements
GB 15382 cylinder valves - General technical requirements
GB 20300 road transport explosives and toxic chemicals vehicle safety and technical conditions
GB/T 23466 Guide for Selection of hearing protectors
GB/T 27476.1-2014 testing laboratory Safety - Part 1. General
GB 50057 Lightning in design
GB 50311 cabling system design specification
3 Terms and Definitions
GB/T 27476.1-2014 and as defined in the following terms and definitions apply to this document.
3.1 Failsafe
When a component failure, without increasing the design hazards.
3.2 Safety interlocks
Before danger exclusion can prevent exposure to hazardous areas, or in the event of contact with a device that automatically exclude a dangerous situation.
GB 28881-2023 | TSG D7006-2020 | GB/T 29639-2020 | GB/T 27476.7-2022 | GB/T 27476.6-2020 | GB/T 27476.2-2014 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 20 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 27476.3-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 27476.1-2014 — Safety in testing laboratories—Part 1: General aspects
GB/T 27476.2-2014 — Safety in testing laboratories—Part 2: Electrical aspects
GB/T 27476.4-2014 — Safety in testing laboratories - Part 4: Non-ionizing radiations aspects
Secure payment via Stripe
Payments accepted
GB/T 27476.3-2014
$355.00