GB/T 27413-2012Quality control and quality estimation in petroleum products testing laboratory (English PDF)
石油产品检测实验室质量控制与质量评估
This is a limited preview
Buy now to download the full PDF (20 pages)
Need quotation for your management?
Get a formal quotation for GB/T 27413-2012 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 31, 2012
Implementation date
July 1, 2013
Scope
GB/T 27413-2012 is the English-translated version of 石油产品检测实验室质量控制与质量评估.
GB/T 27413-2012 is the Chinese standard "Quality control and quality estimation in petroleum products testing laboratory". Its scope clause reads: This standard specifies the key points of petroleum products testing laboratories to establish and maintain the quality management system.
This standard applies to quality control and quality assessment of petroleum products testing laboratory. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 27413-2012
National Standard of the People's Republic of China
- ICS
- 19.020
- Classification
- B 04
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 3.1 Reference substance
- 3.2 CRMs certifiedreferencematerial, CRM
- 3.3 Quality control samples
1 Scope
This standard specifies the key points of petroleum products testing laboratories to establish and maintain the quality management system.
This standard applies to quality control and quality assessment of petroleum products testing laboratory.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated edition applies to this article
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 27407 quality control laboratories use performance statistics for quality assurance and control chart technical evaluation and analysis of the measurement system
GB/T 27411 common testing laboratory Uncertainty Evaluation Method and representation
GB/T 27412-based verification of a single sample test results of laboratory detection bias
JJF1001 common measurement terms and definitions
3 Terms and Definitions
The following terms and definitions GB/T 27407 and JJF1001 defined apply to this document.
3.1 Reference substance
Standard Substance
Having a sufficiently uniform and stable characteristics of a particular substance, its characteristics are confirmed for measuring or checking the expected nominal characteristic use.
Note 1. The standard assignment or assignment of substances can be used for measurement precision control, only the standard substance assignment available for calibration or measurement trueness control.
Note 2. In a given measurement, a given reference material can only be used for calibration or quality assurance both in one application.
[JJF1001-2011, the definition 8.14]
3.2 CRMs certifiedreferencematerial, CRM
Accompanied by an authority published document, provide a valid program has acquired a degree of uncertainty and traceability or more characteristics
Standard material values.
[JJF1001-2011, the definition 8.15]
3.3 Quality control samples
QC samples
Storing the complete amount sufficient stability and homogenized material, its physical or chemical properties similar to conventional sample measurement system.
Note. For the period of precision and stability under conditions of precision measurement system to identify and monitor.
[GB/T 27407-2010, the definition 3.7]
GB/T 19630-2019 | GB/T 19630.2-2011 | GB/T 19630.3-2011 | GB/T 27415-2013 | GB/T 27412-2012 | GB/T 27411-2012 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 20 pages — is available in the English PDF.
Similar standards
How to Download GB/T 27413-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 27413-2012
$345.00