GB/T 26967-2011Oil injected single screw air compressor for general use (English PDF)
一般用喷油单螺杆空气压缩机
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 26967-2011 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
July 19, 2011
Implementation date
January 1, 2012
Scope
GB/T 26967-2011 is the English-translated version of 一般用喷油单螺杆空气压缩机.
GB/T 26967-2011 is the Chinese standard "Oil injected single screw air compressor for general use".
Its scope clause reads: This standard specifies the general use injection single screw air compressor (hereinafter referred to as the "single screw compressor") terms and definitions, models, basic Parameters, requirements, test methods, inspection rules, marking, packaging and storage requirements.
This standard applies to the drive motor power 2.2kW ~ 630kW, rated discharge pressure of 0.4MPa, 0.7 (0.8) MPa, 1.0MPa, 1.25MPa and 1.6MPa generally fixed and mobile modified single screw compressor.
Rated discharge pressure of other single screw air compressor 0.4MPa ~ 1.6MPa can be performed between the reference to this standard. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 26967-2011
National Standard of the People's Republic of China
- ICS
- 23.140
- Classification
- J 72
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 models and basic parameters
- 5 requires
- 6 Test methods
- 7 Inspection rules
- 8 signs, packaging and storage
- Appendix A (normative) compressed air dew point temperature graph
- Appendix B (normative) allows eccentricity
1 Scope
This standard specifies the general use injection single screw air compressor (hereinafter referred to as the "single screw compressor") terms and definitions, models, basic
Parameters, requirements, test methods, inspection rules, marking, packaging and storage requirements.
This standard applies to the drive motor power 2.2kW ~ 630kW, rated discharge pressure of 0.4MPa, 0.7 (0.8) MPa,
1.0MPa, 1.25MPa and 1.6MPa generally fixed and mobile modified single screw compressor.
Rated discharge pressure of other single screw air compressor 0.4MPa ~ 1.6MPa can be performed between the reference to this standard.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated edition applies to this file. For undated references, the latest edition (including any amendments) applies to this document.
GB 150 steel pressure vessels
GB 151 shell and tube heat exchangers
GB/T 3853-1998 displacement compressors Acceptance Test
GB/T 4975 General term displacement compressors
GB/T 4980 Determination of volumetric compressor noise
GB/T 5330-2003 industrial woven square hole wire mesh
GB/T 6388 transport package shipping mark
GB/T 7777 displacement compressors mechanical vibration measurement and evaluation
GB/T 12243 Spring loaded safety valves
GB/T 13306 signs
GB/T 13384 mechanical and electrical products packaging General technical conditions
GB/T 15487 displacement compressor flow measurement method
GB 19153-2009 displacement air compressors energy efficiency limit value and energy efficiency rating
GB 22207 Safety requirements for displacement air compressors
JB/T 2589 model designation displacement compressors
JB/T 3771 Mobile compressor chassis technical conditions
JB/T 6431 displacement compressors Gray iron castings
JB/T 6908 Steel forgings displacement compressors
JB/T 7662 term displacement compressors rotary compressor
JB/T 9104 displacement compressor iron castings
Safety Technology Supervision TSGR0004-2009 Stationary Pressure Vessels
3 Terms and Definitions
GB 19153-2009, GB/T 4975 and JB/T 7662 in the establishment of terms, definitions, symbols apply to this document.
GB/T 13277.1-2023 | GB/T 4976-2017 | GB/T 33625-2017 | GB/T 19075.2-2025 | GB/T 17774-2025 | GB/T 10893-2025 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Cited by
- GB/T 44200-2024Technical requirements for complete equipments for production of the recycled aggregate from construction and demolition waste
- GB/T 40416-2021Technical requirements of gravel aggregate production complete equipment
- GB 19153-2019Minimum allowable values of energy efficiency and energy efficiency grades for displacement air compressors
- JB/T 11706.2-2015Energy efficiency grades of typical load units driven by three-phase AC motors - Part 2: Energy efficiency grades of screw air compressor units
- JB/T 12564-2015Screw-piston tandem compressor unit
Similar standards
How to Download GB/T 26967-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 26967-2011
$195.00