GB/T 26949.5-2025Industrial trucks - Verification of stability - Part 5: Single-side-loading trucks (English PDF)
工业车辆 稳定性验证 第5部分：侧面式叉车（单侧）
Also coversGB/T26949.5-2025 + GBT26949.5-2025
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 26949.5-2025 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
May 30, 2025
Implementation date
December 1, 2025
Scope
GB/T 26949.5-2025 is the English-translated version of 工业车辆 稳定性验证 第5部分：侧面式叉车（单侧）.
Stability is central to the safe operation of lift trucks, and this part of the stability verification series addresses single-side-loading trucks, the type that handle loads from one side of the vehicle. It is intended to give engineers and test staff a defined national basis for verifying that such trucks resist tipping under the conditions the series considers.
The document is used by manufacturers of industrial trucks during design and type testing, by testing and certification bodies, and by importers who need to demonstrate conformity of imported equipment. Safety engineers and fleet purchasers who ask for evidence of stability verification will also come across it.
It was issued on 30 May 2025 and takes effect on 1 December 2025, replacing GB/T 26949.5-2018. As a recommended national standard it is voluntary, but contracts and related machinery safety requirements often refer to it. Manufacturers with technical files citing the 2018 edition should bring them into line with the new text.
Found what you need?
Document preview — GB/T 26949.5-2025
National Standard of the People's Republic of China
- ICS
- 53.060
- Classification
- J83
- Replacing
- GB/T 26949.5-2018
Issued by: State Administration for Market Regulation; Standardization Administration of China
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
Foreword
GB/T 26949.5-2025 is a recommended national standard (GB/T) of the People's Republic of China, issued on 30 May 2025 by the State Administration for Market Regulation and the Standardization Administration of China, with effect from 1 December 2025.
This edition replaces GB/T 26949.5-2018.
The document adopts an international standard (ISO or IEC).
It is under the responsibility of the China Machinery Industry Federation.
Classification: ICS 53.060; CCS J83.
1 Scope
Stability is central to the safe operation of lift trucks, and this part of the stability verification series addresses single-side-loading trucks, the type that handle loads from one side of the vehicle. It is intended to give engineers and test staff a defined national basis for verifying that such trucks resist tipping under the conditions the series considers.
The document is used by manufacturers of industrial trucks during design and type testing, by testing and certification bodies, and by importers who need to demonstrate conformity of imported equipment. Safety engineers and fleet purchasers who ask for evidence of stability verification will also come across it.
It was issued on 30 May 2025 and takes effect on 1 December 2025, replacing GB/T 26949.5-2018. As a recommended national standard it is voluntary, but contracts and related machinery safety requirements often refer to it. Manufacturers with technical files citing the 2018 edition should bring them into line with the new text.
Remaining clauses in the full document
- 2 Normative references
- 3 Terms and definitions
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
Editions of GB/T 26949.5
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 26949.5-2025 | Industrial trucks - Verification of stability - Part 5: Single-side-loading trucks | current edition | Current |
| GB/T 26949.5-2018 | Industrial trucks--Verification of stability--Part 5: Single-side-loading trucks | previous edition | In force until 1 December 2025 |
This page sells the current edition, GB/T 26949.5-2025. Earlier editions are listed for reference only.
How to Download GB/T 26949.5-2025
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 26949.1-2020 — Industrial trucks - Verification of stability - Part 1: General
GB/T 26949.10-2026 — Industrial trucks - Verification of stability - Part 10: Additional stability test for trucks operating in the specialcondition of stacking with load laterally displaced by powered devices
GB/T 26949.11-2016 — Industrial trucks -- Verification of stability -- Part 11: Industrial variable-reach trucks
Secure payment via Stripe
Payments accepted
GB/T 26949.5-2025
$255.00