GB/T 26949.3-2025Industrial trucks - Verification of stability - Part 3: Reach and straddle trucks (English PDF)
工业车辆 稳定性验证 第3部分：前移式和插腿式叉车
Also coversGB/T26949.3-2025 + GBT26949.3-2025
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 26949.3-2025 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
May 30, 2025
Implementation date
December 1, 2025
Scope
GB/T 26949.3-2025 is the English-translated version of 工业车辆 稳定性验证 第3部分：前移式和插腿式叉车.
Reach trucks and straddle trucks work in narrow aisles and at height, where tipping risk is a genuine design concern. This part of the stability verification series addresses those two truck types, giving a national reference for verifying their stability.
Warehouse equipment manufacturers will use it to support design validation and type tests, while testing laboratories and certification bodies can use it as the basis of their verification work. Importers bringing reach or straddle trucks into China, and buyers who request stability evidence in tender documents, are further likely users. Safety managers in logistics operations may also refer to it when assessing the equipment they specify.
The standard was issued on 30 May 2025 and takes effect on 1 December 2025. It replaces GB/T 26949.3-2018. It is a recommended national standard, so its use is voluntary unless it is called up by a contract, a technical regulation or a product specification. Companies should update technical documentation that cites the earlier edition.
Found what you need?
Document preview — GB/T 26949.3-2025
National Standard of the People's Republic of China
- ICS
- 53.060
- Classification
- J83
- Replacing
- GB/T 26949.3-2018
Issued by: State Administration for Market Regulation; Standardization Administration of China
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
Foreword
GB/T 26949.3-2025 is a recommended national standard (GB/T) of the People's Republic of China, issued on 30 May 2025 by the State Administration for Market Regulation and the Standardization Administration of China, with effect from 1 December 2025.
This edition replaces GB/T 26949.3-2018.
The document adopts an international standard (ISO or IEC).
It is under the responsibility of the China Machinery Industry Federation.
Classification: ICS 53.060; CCS J83.
1 Scope
Reach trucks and straddle trucks work in narrow aisles and at height, where tipping risk is a genuine design concern. This part of the stability verification series addresses those two truck types, giving a national reference for verifying their stability.
Warehouse equipment manufacturers will use it to support design validation and type tests, while testing laboratories and certification bodies can use it as the basis of their verification work. Importers bringing reach or straddle trucks into China, and buyers who request stability evidence in tender documents, are further likely users. Safety managers in logistics operations may also refer to it when assessing the equipment they specify.
The standard was issued on 30 May 2025 and takes effect on 1 December 2025. It replaces GB/T 26949.3-2018. It is a recommended national standard, so its use is voluntary unless it is called up by a contract, a technical regulation or a product specification. Companies should update technical documentation that cites the earlier edition.
Remaining clauses in the full document
- 2 Normative references
- 3 Terms and definitions
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
Editions of GB/T 26949.3
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 26949.3-2025 | Industrial trucks - Verification of stability - Part 3: Reach and straddle trucks | current edition | Current |
| GB/T 26949.3-2018 | Industrial trucks - Verification of stability - Part 3: Reach and straddle trucks | previous edition | In force until 1 December 2025 |
This page sells the current edition, GB/T 26949.3-2025. Earlier editions are listed for reference only.
How to Download GB/T 26949.3-2025
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 26949.1-2020 — Industrial trucks - Verification of stability - Part 1: General
GB/T 26949.10-2026 — Industrial trucks - Verification of stability - Part 10: Additional stability test for trucks operating in the specialcondition of stacking with load laterally displaced by powered devices
GB/T 26949.11-2016 — Industrial trucks -- Verification of stability -- Part 11: Industrial variable-reach trucks
Secure payment via Stripe
Payments accepted
GB/T 26949.3-2025
$165.00