GB/T 26930.3-2011Carbonaceous materials for the production of primary aluminium -- Pitch for electrodes -- Part 3: Determination of density -- Pycnometric method (English PDF)
原铝生产用炭素材料 煤沥青 第3部分:密度的测定 比重瓶法
This is a limited preview
Buy now to download the full PDF (13 pages)
Need quotation for your management?
Get a formal quotation for GB/T 26930.3-2011 in 30 minutes.
Issued by
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Level / Type
National · Recommended
Issue date
September 29, 2011
Implementation date
May 1, 2012
Scope
GB/T 26930.3-2011 is the English-translated version of 原铝生产用炭素材料 煤沥青 第3部分:密度的测定 比重瓶法.
GB/T 26930.3-2011 — This section GB/T 26930 specifies the primary aluminum production of coal asphalt pycnometer density determination. This section applies to the determination of primary aluminum production bituminous coal density pycnometer method.
Found what you need?
Document preview — GB/T 26930.3-2011
National Standard of the People's Republic of China
- ICS
- 71.100.10
- Classification
- Q 52
Issued by: General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 PRINCIPLE OF THE METHOD
- 4 Reagents and materials
- 4.1 ethanol. 95% (volume fraction), AR.
- 4.2 acetone. AR.
- 4.3 nonionic wetting agent. 0.1% (mass fraction) solution.
- 4.4 Chromium sulfur mixture. such as potassium dichromate solution and the like.
- 5 Instruments
- 5.1 pycnometer. Volume 50mL (in line with ISO 3507).
- 5.4 Oven. temperature controlled at 120 degrees C +/- 2 degrees C.
- 5.5 Water bath. temperature controlled at 25 degrees C.
Foreword
GB/T 26930 "carbonaceous materials used in aluminum production bituminous coal" There are five sections.
--- Part 1. Determination of moisture content - Azeotropic distillation method;
--- Part 2. Determination of softening point and ball method;
--- Part 3. Determination of density Pyknometer;
--- Part 4. Determination of quinoline insoluble content;
--- Part 5. Determination of toluene-insoluble matter content.
This is Part 3.
This section drafted in accordance with GB/T 1.1-2009 given rules.
This section uses the translation method identical with ISO 6999. 1983 "Determination of carbon material used in the production of primary aluminum bituminous coal density of proportion
Bottle method. " This part identical with ISO 6999. 1983 when it removed the foreword and introduction.
Consistency correspondence between this part of international documents and normative references of our files are as follows.
--- GB/T 26297.5 carbonaceous materials used in aluminum sampling method - Part 5. coal tar pitch (ISO 6257.2002, MOD).
This section is responsible for drafting unit. Cable-Development Co., Ltd., China Nonferrous Metals Industry Standards Metrology and Quality Institute, Aluminum Corporation of China
Ltd. Zhengzhou Research Institute.
Participated in the drafting of this section. Beijing Science and Technology Co., Ltd. British Spike.
1 Scope
This section GB/T 26930 specifies the primary aluminum production of coal asphalt pycnometer density determination.
This section applies to the determination of primary aluminum production bituminous coal density pycnometer method.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member, undated references, the latest edition (including any amendments) applies to this document.
ISO 3507 pycnometer (Pyknometers)
Mutual test repeatability and reproducibility of the assay (Precisionoftestmethods accuracy of laboratory test method ISO 5725
Determinationofrepeatabilityandreproducibilitybyinter-laboratorytests)
ISO 6257 carbonaceous materials used in aluminum bituminous coal sampling method (Carbonaceousmaterialsusedintheproductionof
aluminium-Pitchforelectrodes-Sampling)
3 PRINCIPLE OF THE METHOD
Determination of the density of vacuum degassing treatment at a temperature of 25 degrees C bituminous coal using Pyknometer.
4 Reagents and materials
During the test, only water analytical reagent, distilled water or the same purity to meet the requirements.
4.1 ethanol. 95% (volume fraction), AR.
4.2 acetone. AR.
4.3 nonionic wetting agent. 0.1% (mass fraction) solution.
4.4 Chromium sulfur mixture. such as potassium dichromate solution and the like.
5 Instruments
5.1 pycnometer. Volume 50mL (in line with ISO 3507).
5.2 pump. equipped with safety valves and filters, power of about 1m3/h, the residual pressure of 3.3kPa.
5.3 airtight container. for-receiving pycnometer (5.1), connected to the separation channel, during the test to maintain a vacuum state, shown in Figure 1.
Warning. When a vacuum, airtight container needs to be placed behind the security screen use.
5.4 Oven. temperature controlled at 120 degrees C +/- 2 degrees C.
5.5 Water bath. temperature controlled at 25 degrees C.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 13 pages — is available in the English PDF.
Referenced standards
Normative references
ISO 3507 · ISO 5725 · ISO 6257
How to Download GB/T 26930.3-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 26930.4-2011 — Carbonaceous materials for the production of primary aluminium -- Pitch for electrodes -- Part 4: Determination of content of quinoline-insoluble material
GB/T 26930.2-2011 — Carbonaceous materials for the production of primary aluminium -- Pitch for electrodes -- Part 2: Determination of softening point by the ring and ball method
GB/T 26930.5-2011 — Carbonaceous materials for the production of primary aluminium -- Pitch for electrodes -- Part 5: Determination of content of toluene-insoluble material
GB/T 26930.3-2011
$85.00