Valid

GB/T 26831.1-2011Society energy metering for reading system specification - Part 1: Data exchange (English PDF)

社区能源计量抄收系统规范 第1部分:数据交换

Preview PDF

This is a limited preview

Buy now to download the full PDF (46 pages)

Need quotation for your management?

Get a formal quotation for GB/T 26831.1-2011 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

July 29, 2011

Implementation date

December 1, 2011

Scope

GB/T 26831.1-2011 is the English-translated version of 社区能源计量抄收系统规范 第1部分:数据交换.

GB/T 26831.1-2011 is the Chinese standard "Society energy metering for reading system specification -- Part 1: Data exchange". Its scope clause reads: This section specifies the method of using a common data exchange and communications for instrumentation and remote meter reading.

This section is a community energy meter reading system specification standard measurement in Part 1. The main purpose of Part 1 is to provide a standardized protocol for the application layer of the instrument.

Note: Due to the remote meter reading meter is standard IEC /CENELEC tasks, therefore, this section does not include energy meter.

Its clauses include terms and definitions; overview; network structure; exchange data locally connected; local area network (lan) for data exchange; wide area network (wan) data exchange; rf communication data exchange; upper-layer protocol; cosem extension; object identification system (variable naming conventions); object encoding (variable name). It was issued on 2011-07-29.

Found what you need?

Document preview — GB/T 26831.1-2011

National Standard of the People's Republic of China

ICS
17.220.20
Classification
N 22

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Introduction
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Overview
  • 5 network structure
  • 6 exchange data locally connected
  • 7 local area network (LAN) for data exchange
  • 8 Wide Area Network (WAN) data exchange
  • 9 RF communication data exchange
  • 10 upper-layer protocol
  • 11 COSEM extension
  • 12 Object identification system (variable naming conventions)
  • 13 object encoding (variable name)
  • Appendix A (normative) Basic meter class
  • A.1 basic requirements for thermal dispenser
  • A.2 of heat/cold meter scale basic requirements
  • A.3 on the basic requirements for the gas meter
  • A.4 basic requirements for hot/cold meter
  • Annex B (informative) Gas volume conversion
  • B.1 Introduction
  • B.2 gas volume converters abstract data model Introduction
  • B.3 gas volume converters abstract data model
  • B.4 Measuring principle volume conversion and energy calculations
  • B.5 volume data conversion and energy flow calculations
  • Annex C (normative) Terms and definitions

Foreword

GB/T 26831 "Collecting community energy metering system specification" is divided into four parts. Part 1. Data exchange; Part 2. Physical and link layer; Part 3. Dedicated application layer; Part 4. Wireless meter reading copy.

This standard reference system of the European Standard EN13757. Wherein, Part 1, Part 2, Part 3 using a reference EN13757-1, EN13757-2, EN13757-3 corresponding portion, Part 4 combined with wireless meter reading technology status and national wireless Letter made major changes to the relevant standards.

This section Annexes A and C are normative appendix, Appendix B is an informative annex.

1 Scope

This section specifies the method of using a common data exchange and communications for instrumentation and remote meter reading.

This section is a community energy meter reading system specification standard measurement in Part 1.

The main purpose of Part 1 is to provide a standardized protocol for the application layer of the instrument.

Note: Due to the remote meter reading meter is standard IEC /CENELEC tasks, therefore, this section does not include energy meter.

2 Normative references

The following documents contain provisions which, through reference GB/T 26831 in this section constitute provisions of this section. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section.

GB/T 7421-2008 Information technology - Telecommunications and information exchange between high-level data link control (HDLC) procedures (ISO /IEC 13239:2002, IDT)

GB/T 9387.1-1998 Information technology - Open Systems Interconnection - Basic Reference Model - Part 1: Basic Model (ISO /IEC 7498-1:1994, IDT)

GB/T 15629.2-2008 Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Particular requirements Part 2: Logical Link Control (ISO /IEC 8802-2:1998, IDT)

GB/T 16262.1-2006 Information technology - Abstract Syntax Notation 1 (ASN.1) - Part 1. Specification of basic notation (ISO /IEC 8824-1:2002, IDT)

GB/T 16687.1-2008 Information technology - Open Systems Interconnection association control service element connection-oriented protocol - Part 1: Protocol specification (ISO 8650-1:1996, IDT)

GB/T 16688-2008 Information technology - Open Systems Interconnection - Service definition for the association control service element (ISO /IEC 8649. 1996, IDT)

GB/T 16720.1-2005 Industrial automation systems - Manufacturing Message Specification - Part 1: Service definition (ISO 9506-1. 2003, IDT)

GB/T 18657.2-2002 Telecontrol equipment and systems - Part 5: Transmission protocols Section 2. Link transmission procedures (IEC 60870-5-2:1992, IDT)

GB/T 19882.31-2007 automatic meter reading system - Part 3-1. Application layer data exchange protocol object identification system (OBIS) (IEC 62056-61:2002, IDT)

GB/T 19882.32-2007 automatic meter reading system - Part 3-2. Application layer data exchange protocol interface class (IEC 62056-62:2002, IDT)

GB/T 19882.33-2007 Automatic Meter Reading System - Part 3-3. Application layer data exchange protocol COSEM application layer (IEC 62056-53:2002, IDT)

GB/T 19897.1-2005 Automatic Meter Reading System Lower Layer Communication Protocol Part 1: Direct local data exchange (IEC 62056-21:2002, IDT)

GB/T 19897.2-2005 Automatic Meter Reading System Lower Layer Communication Protocol Part 2: LAN based on twisted pair with carrier signal

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 46 pages — is available in the English PDF.

Referenced standards

Normative references

GB/T 16688-2008 · GB/T 19882.32-2007 · GB/T 19882.33-2007 · GB/T 19897.2-2005 · GB/T 19897.4-2005 · DL/Z 790.6-200X · ISO 1155 · ISO 1177 · ISO 1745 · ISO/IEC 646 · EN 834 · EN 1434-1 · EN 1434-2 · EN 12405 · EN 13757-2-2002

Similar standards

How to Download GB/T 26831.1-2011

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Instant delivery (0–9 sec)

    Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
46 pages
Instant delivery (0–9 sec)
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 26831.1-2011

$650.00