GB/T 26813-2011Double beam UV/VIS spectrophotometer (English PDF)
双光束紫外可见分光光度计
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 26813-2011 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
July 29, 2011
Implementation date
December 1, 2011
Scope
GB/T 26813-2011 is the English-translated version of 双光束紫外可见分光光度计.
GB/T 26813-2011 is the Chinese standard "Double beam UV/VIS spectrophotometer". Its scope clause reads: This standard specifies the double-beam UV-Vis spectrophotometer classification, requirements, test methods, inspection rules and signs, packaging, transport and Storage and so on.
This standard applies to an independent reference beam of 200nm ~ 900nm and independent than the reference sample cell, the main spectral regions, continuous wavelength Double beam UV-Vis spectrophotometer tone (hereinafter referred to as "equipment"), the wavelength range similar to this double beam spectrophotometer can refer to use. Its clauses include rating; requirements.
Found what you need?
Document preview — GB/T 26813-2011
National Standard of the People's Republic of China
- ICS
- 71.040.01
- Classification
- N 53
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 rating
- 4 Requirements
1 Scope
This standard specifies the double-beam UV-Vis spectrophotometer classification, requirements, test methods, inspection rules and signs, packaging, transport and
Storage and so on.
This standard applies to an independent reference beam of 200nm ~ 900nm and independent than the reference sample cell, the main spectral regions, continuous wavelength
Double beam UV-Vis spectrophotometer tone (hereinafter referred to as "equipment"), the wavelength range similar to this double beam spectrophotometer can refer to use.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 191-2008 Packaging - Pictorial signs
GB/T 2829-2002 periodic inspection Sampling procedures and tables (suitable for process stability test)
GB 4793.1-2007 measurement, control and laboratory safety requirements for electrical equipment - Part 1. General requirements
GB/T 11606-2007 analytical instruments environmental test methods
GB/T 13384-2008 mechanical and electrical products packaging General technical conditions
3 rating
Equipment divided by metric descending I, II, III three. The indicators for each level of the instrument should be at or better than the corresponding grade
Claim.
4 Requirements
4.1 Normal operating conditions
The instrument should be able to work properly under the following conditions.
a) Ambient temperature. 5 °C ~ 35 °C;
b) Relative humidity less than 85%;
c) The instrument should be placed on a stable work surface, there should be light, strong wind, strong vibrations and strong electromagnetic interference;
d) Environment No corrosive gases, dust interference;
e) Power supply voltage 220V ± 22V, frequency 50Hz ± 1Hz.
4.2 wavelength accuracy and wavelength reproducibility
Instruments wavelength accuracy and wavelength reproducibility should not exceed the requirements of Table 1.
GB/T 17360-2020 | GB/T 25929-2010 | GB/T 25930-2010 | GB/T 26812-2011 | GB/T 26811-2011 | GB/T 26810-2011 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Cited by
- GB/T 45764-2025Fine ceramics - Determination of photocatalytic activity of surfaces in an aqueous medium - Degradation of methylene blue
- GB/T 7729-2021Chemical analysis of metallurgical products—General rule for spectrophotometric methods
- GB/T 36084-2018Nanotechnology - Determination of copper, manganese and chromium ions in aqueous solution - Ultraviolet-visible spectrophotometry
- GB/T 37206-2018Test method for antibacterial properties of organic separation membrane
- GB/T 34796-2017Quantification and purity analysis of nucleic acid concentration in solution - Ultraviolet spectrophotometry
- JY/T 0601-2017Equipment specifications for the major of hydraulic engineering in vocational colleges
Similar standards
How to Download GB/T 26813-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 26813-2011
$255.00