GB/T 26795-2011Numerical batch control water meter (English PDF)
数控定量水表
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 26795-2011 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
July 29, 2011
Implementation date
December 1, 2011
Scope
GB/T 26795-2011 is the English-translated version of 数控定量水表.
GB/T 26795-2011 is the Chinese standard "Numerical batch control water meter". Its scope clause reads: This standard specifies the terms and definitions NC quantitative meter, general requirements, technical requirements, test methods, inspection rules, marking, packaging, Transport and storage requirements.
This standard applies to quantitative control of water sites, caliber 15mm ~ 40mm, working pressure rating of MAP10, water temperature class CNC T50 quantitative meter. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 26795-2011
National Standard of the People's Republic of China
- ICS
- 17.120.10
- Classification
- N 12
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 2 General requirements
- 5 2 Technical Requirements
- 6 Test Method
- 7 Inspection rules
- 8 signs, packaging, transportation and storage
1 Scope
This standard specifies the terms and definitions NC quantitative meter, general requirements, technical requirements, test methods, inspection rules, marking, packaging,
Transport and storage requirements.
This standard applies to quantitative control of water sites, caliber 15mm ~ 40mm, working pressure rating of MAP10, water temperature class
CNC T50 quantitative meter.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 191-2008 Packaging - Pictorial signs (ISO 780.1997, MOD)
Measurement of water flow in closed conduits 778.1-2007 GB/T cold potable water and hot water - Part 1. Specification (ISO 4064-1.2005, IDT)
Measurement of water flow in closed conduits 778.3-2007 GB/T cold potable water and hot water - Part 3. Test method
Method and test equipment (ISO 4064-3.2005, IDT)
GB/T 2423.1 electric and electronic products environmental testing - Part 2. Test methods Test A. Cold (GB/T 2423.1-
2008, IEC 60068-2-1.2007, IDT)
GB/T 2423.2 electric and electronic products environmental testing - Part 2. Test methods Test B. Dry heat (GB/T 2423.2-
2008, IEC 60068-2-2.2007, IDT)
GB/T 2423.4 Environmental testing for electric and electronic products Part 2. Test methods - Test Db. Damp heat (12h 12h cycle
Ring) (GB/T 2423.4-2008, IEC 60068-2-30.2005, IDT)
GB 4208-2008 housing protection (IP Code) (IEC 60529.2001, IDT)
GB/T 13384-2008 mechanical and electrical products packaging General technical conditions
GB/T 15479-1995 industrial automation instruments of insulation resistance, dielectric strength technical requirements and test methods
GB/T 17626.2 Electromagnetic compatibility Testing and measurement techniques - Electrostatic discharge immunity test (GB/T 17626.2-2006,
IEC 61000-4-2.2001, IDT)
GB/T 17626.3 electromagnetic compatibility test and measurement technology RFEMS test (GB/T 17626.3-
2006, IEC 61000-4-3.2002, IDT)
GB/T 17626.4 Electromagnetic compatibility Testing and measurement techniques - Electrical fast transient burst immunity test (GB/T 17626.4-
2008, IEC 61000-4-4.2004, IDT)
GB/T 17626.5 electromagnetic compatibility test and measurement technology surge (impact) immunity test (GB/T 17626.5-2008,
IEC 61000-4-5.2005, IDT)
JB/T 7352 industrial process control systems with solenoid valve
Basic environmental conditions and test methods JB/T 9329 Instrumentation transport, transport and storage
3 Terms and Definitions
Terminology and definitions The following terms and definitions GB/T 778.1-2007 established apply to this standard.
GB/T 778.1-2018 | GB/T 778.4-2018 | GB/T 21117-2007 | GB/T 42567.5-2025 | GB/T 28857-2025 | GB/T 26801-2011 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 26795-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 26795-2011
$255.00