GB/T 26769-2011Video-based detecting method for pavement surface distress (English PDF)
路面损坏视频检测方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 26769-2011 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
July 20, 2011
Implementation date
December 1, 2011
Scope
GB/T 26769-2011 is the English-translated version of 路面损坏视频检测方法.
GB/T 26769-2011 is the Chinese standard "Video-based detecting method for pavement surface distress".
Its scope clause reads: This standard specifies the application of vehicle-mounted road laser video disease detection system (hereinafter referred to as the detection system), the road surface damage detection Data acquisition, data validation, data processing, reporting and other operational processes.
This standard applies to the highway, a highway project quality acceptance and road maintenance in the detection and evaluation of other grades of highway inspection Measurement and evaluation can refer to the implementation.
Its clauses include normative reference documents; terms and definitions; equipment requirements; detection conditions.
Found what you need?
Document preview — GB/T 26769-2011
National Standard of the People's Republic of China
- ICS
- 93.080.99
- Classification
- P 96
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 normative reference documents
- 3 terms and definitions
- 4 Equipment requirements
- 5 detection conditions
1 Scope
This standard specifies the application of vehicle-mounted road laser video disease detection system (hereinafter referred to as the detection system), the road surface damage detection
Data acquisition, data validation, data processing, reporting and other operational processes.
This standard applies to the highway, a highway project quality acceptance and road maintenance in the detection and evaluation of other grades of highway inspection
Measurement and evaluation can refer to the implementation.
2 normative reference documents
The terms of the following documents are hereby incorporated by reference into this standard. Whichever is the date of the reference file, which is followed by all (Excluding corrigenda) or revisions do not apply to this standard, however, encourage the parties to reach an agreement under this standard
Whether you can use the latest version of these files. For undated references, the latest edition applies to this standard.
GB/T 917 highway route identification rules and national road number
JT/T 678 vehicle road surface laser video disease detection system
JTGH20-2007 Highway Technical Status Assessment Standard
3 terms and definitions
The following terms and definitions apply to this standard.
3.1 Video
Using high-speed digital imaging technology, and a certain frequency of continuous storage, transmission and playback of the image sequence.
Note. The image can be regarded as a special case of video under certain conditions.
3.2 Brightness uniformity
Brightness uniformity of each area in pavement images.
Note. It reflects the extent to which the road surface is affected by uneven illumination.
3.3 Noise
Due to the interference of the imaging system by various factors, and additional information generated on the image.
3.4 Blur
Due to the loss of high-frequency components of the road image caused by the illusion or trailing phenomenon.
4 Equipment requirements
Road damage video detection using vehicle-based road laser video disease detection system to complete the system should be consistent with the provisions of JT/T 678.
5 detection conditions
5.1 working environment conditions
The working conditions at the time of inspection shall comply with the relevant requirements in JT/T 678.
GB/T 24721.3-2023 | GB/T 24721.4-2023 | GB/T 24721.5-2023 | GB/T 47887-2026 | GB/T 24719-2025 | GB/T 22040-2025 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 26769-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 26769-2011
$135.00