GB/T 26701-2011General technical requirements for model products (English PDF)
模型产品通用技术要求
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 26701-2011 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
June 16, 2011
Implementation date
December 1, 2011
Scope
GB/T 26701-2011 is the English-translated version of 模型产品通用技术要求.
GB/T 26701-2011 is the Chinese standard "General technical requirements for model products". Its scope clause reads: This standard specifies the terms and definitions of product models, technical requirements, test methods, defect classification and eligibility determination principle.
This standard applies to the operating voltage is less than or equal to 36V or uncharged, intended for adolescents and adults 14 years and older favorites, playing or making The model used products, including static or dynamic aerospace model, navigation model and vehicle model.
Additional requirements for pure collection type model of the product are given in Appendix A normative. This standard does not apply the following products. --- Competition specific model; --- Non-commercial distribution of the product model; --- Internal combustion engine driven model of the product; ---kite.
Note. The adapters and battery chargers are not considered models, even if they are provided with the model. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 26701-2011
National Standard of the People's Republic of China
- ICS
- 97.200.50
- Classification
- Y 57
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 3 Technical requirements
- 4.1 Safety Requirements
- 4.2 Performance Requirements
- 4.3 appearance requirements
- 4.4 signs and instructions
- 6 5.1 Safety Inspection
- 5.2 Performance test
- 6 7 defect classification
- 7 qualified type testing determination Principle
- 7.2 Eligible determination Principle
- Appendix A (normative) pure collectable model
- Annex B (informative) remote control radio remote control model
- Annex C (informative) laser radiation warning labels and instructions marked Specification
1 Scope
This standard specifies the terms and definitions of product models, technical requirements, test methods, defect classification and eligibility determination principle.
This standard applies to the operating voltage is less than or equal to 36V or uncharged, intended for adolescents and adults 14 years and older favorites, playing or making
The model used products, including static or dynamic aerospace model, navigation model and vehicle model.
Additional requirements for pure collection type model of the product are given in Appendix A normative.
This standard does not apply the following products.
--- Competition specific model;
--- Non-commercial distribution of the product model;
--- Internal combustion engine driven model of the product;
---kite.
Note. The adapters and battery chargers are not considered models, even if they are provided with the model.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB 6675 National Safety Technical Code for Toys
Cut test GB/T 9286-1998 Paints and varnishes
GB 19865-2005 electrical safety of toys
Radio Regulations of the People's Republic of China [in 1993] of the State Council, the Central Military Commission
Micro-power technology (short-range) radio equipment requirements [2005] Ministry of Information Industry
3 Terms and Definitions
The following terms and definitions apply to this standard.
3.1 Model
High degree of simulation in form or function, and work fine for adolescents and adults 14 years and older favorites, play or use of the product.
3.2 Static model
No drive mechanism model of the product.
3.3 Dynamic Model
A driving mechanism model of the product.
3.3.1 Electric model
Driven by electric power controller-dynamic model of the product.
3.3.2 Wire model linecontrolmodel
Controlled electric model operation of the product through the wire.
GB/T 27689-2025 | GB 28482-2012 | GB 28265-2012 | GB/T 24914-2026 | GB/T 22788-2026 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 26701-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 26701-2011
$135.00