Valid

GB/T 26678-2011Electrical control system of machine tool - The requirements of processing program for CNC surface grinding machines (English PDF)

机床电气控制系统数控平面磨床的加工程序要求

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 26678-2011 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

June 16, 2011

Implementation date

December 1, 2011

Scope

GB/T 26678-2011 is the English-translated version of 机床电气控制系统数控平面磨床的加工程序要求.

GB/T 26678-2011 is the Chinese standard "Electrical control system of machine tool - The requirements of processing program for CNC surface grinding machines".

Its scope clause reads: This standard specifies the CNC surface grinding machine should have a basic machining program, also provides the machining program and the program name to determine requirements.

This standard applies to including CNC horizontal axis moments Taiwan surface grinder, CNC horizontal axis yen Taiwan surface grinder, CNC vertical rectangular table surface grinder, NC Vertical shaft yen Taiwan surface grinder, CNC surface grinding machine gantry CNC surface grinder, including. Its clauses include terms and definitions.

Found what you need?

Document preview — GB/T 26678-2011

National Standard of the People's Republic of China

ICS: 25.040.20
Classification: J 50

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 CNC surface grinder with basic machining program
4.1 Overview
4.2 CNC horizontal axis moments Taiwan surface grinder machining program
4.3 CNC horizontal axis yen Taiwan surface grinder machining program
4.4 vertical rectangular table surface grinder CNC machining program
4.5 CNC vertical spindle and rotary table surface grinder machining program
4.6 CNC Gantry surface grinder due process procedures
5 requires the machining program
6.2 determination subroutine name
Appendix A (normative) CNC surface grinder 5 sports legend

1 Scope

This standard specifies the CNC surface grinding machine should have a basic machining program, also provides the machining program and the program name to determine requirements.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein

Member. For undated references, the latest edition (including any amendments) applies to this document.

GB 5226.1-2008 Safety of machinery - Electrical machinery and electrical equipment - Part 1. General requirements (IEC 60204-1.2005,

IDT)

GB/T 8129-1997 Industrial automation systems - Numerical control of machines vocabulary (idt ISO 2806.1994)

GB 15760-2004 Metal-cutting machine tool safety general technology condition

GB/T 19660-2005 Industrial automation systems and integration - Numerical control of machines and motion coordinate system named (ISO 841.

2001, IDT)

3 Terms and Definitions

GB/T 8129-1997 and defined the following terms and definitions apply to this document.

3.1 Infeed transversefeed

Machine tool relative to the workpiece as the Z-axis direction (horizontal shaft surface grinding machine) or Y-axis direction (vertical surface grinder) feed motion (see attached

Record A), also known as out movement.

3.2 Vertical feed longitudinalfeed

Machine tool relative to the workpiece along the X-axis direction (see Appendix A) of the feed movement, also known as the left and right movement.

3.3 Vertical feed

Machine tool relative to the workpiece as the Y-axis direction (horizontal shaft surface grinding machine) or Z-axis direction (vertical surface grinder) feed motion, also known as the

Under motion.

3.4 Way inlet one-wayfeed

Machine of lateral direction of movement into and out of the sport for a period of grinding machine (spindle) for vertical motion into the workpiece to a

Set feed.

Similarly, the longitudinal direction of the machine for movement, left and right movement for a period of grinding machine (spindle) for vertical movement of the workpiece feed

GB/T 29001.5-2013 | GB/T 28615-2012 | GB/T 24343-2009 | GB/T 26677-2011 | GB/T 26676-2011 | GB/T 26675-2011 | […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Cited by

JB/T 11724-2013Electrical control systems of numerically controlled grinding machines - Technical requirements

Similar standards

GB/T 41970-2022|GB/T 40328-2021|GB/T 40329-2021|GB/T 39127-2020|GB/T 39128-2020|GB/T 39129-2020

How to Download GB/T 26678-2011

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.