GB/T 26661-2011SWP universal coupling with spider (English PDF)

1 Scope

This standard specifies the SWP large cross shaft universal coupling (hereinafter referred to as a large universal coupling) the type, basic parameters and scale

Inch, technical requirements, inspection rules and signs, packaging, storage and so on.

This standard applies to shafting coupling two different axes of the large universal joint, its turning diameter of 600mm ~ 1200mm; Biography

Hands nominal torque 1150kN · m ~ 12500kN · m; axis angle of 5 ° ~ 15 °.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein

Member. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 191 Packaging - Pictorial signs

GB/T 197 common thread tolerance

GB/T 307.1 Rolling to the heart bearing tolerance

GB/T 1184 shape and position tolerances without individual tolerance value

GB/T 1800.2 Geometrical product specifications (GPS) limits and fits - Part 2. Standard tolerance grades and holes and shafts limit bias

Difference list

GB/T 3098.1 Mechanical properties of fasteners Bolts screws and studs

GB/T 3098.4 Mechanical properties of fasteners fine thread

GB/T 4604 Rolling radial clearance

GB/T 4879 rust-proof packaging

GB/T 6388 transport package shipping mark

GB/T 13384 mechanical and electrical products packaging General technical conditions

JB/T 5000.3 Heavy Machinery General requirements - Part 3. welded

JB/T 5000.15 Heavy Machinery General technical requirements - Part 15. Non-destructive testing of steel forgings

3 Types, basic parameters and dimensions

Type 3.1

Large universal coupling types are divided into the following three (Table 1).

GB/T 37718-2019 | GB/T 5014-2017 | GB/T 5015-2017 | GB/T 26663-2011 | GB/T 26662-2011 | GB/T 26660-2011 | […]