GB/T 26570.1-2011Determination of particle in gases - Light-scattering method - Part 1: Determination of particle in pipeline gases (English PDF)
气体中颗粒含量的测定 光散射法 第1部分:管道气体中颗粒含量的测定
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 26570.1-2011 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
June 16, 2011
Implementation date
November 1, 2011
Scope
GB/T 26570.1-2011 is the English-translated version of 气体中颗粒含量的测定 光散射法 第1部分:管道气体中颗粒含量的测定.
GB/T 26570.1-2011 is the Chinese standard "Determination of particle in gases - Light-scattering method - Part 1: Determination of particle in pipeline gases".
Its scope clause reads: This section provides the gas particles in the determination of terms and definitions, methods, principles, equipment requirements, testing procedures, and calibration values \u200b\u200btraceable Source, the results of calculation and judgment, reports.
This section applies to the determination of particle size and content of the gas through the pipeline. Detection range of particle diameter. 0.1µm ~ 10µm. This section does not apply to bottled gas and gas to liquid phase present. Its clauses include terms and definitions; principle of the method.
Found what you need?
Document preview — GB/T 26570.1-2011
National Standard of the People's Republic of China
- ICS
- 71.040.40
- Classification
- G 86
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 principle of the method
1 Scope
This section provides the gas particles in the determination of terms and definitions, methods, principles, equipment requirements, testing procedures, and calibration values traceable
Source, the results of calculation and judgment, reports.
This section applies to the determination of particle size and content of the gas through the pipeline. Detection range of particle diameter. 0.1µm ~
10µm.
This section does not apply to bottled gas and gas to liquid phase present.
2 Normative references
The following documents contain provisions which, through reference GB/T 26570 in this section constitute provisions of this section. For dated reference documents
Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section
Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section.
JJF1190 Particle Counter Calibration Specification
3 Terms and Definitions
The following terms and definitions apply to this section.
3.1 Background Found backgroundcount (XB)
It does not contain greater than or equal to a predetermined particle size measured gas values measured by particle counter instrument.
3.2 Sample volume gassamplevolume (VM, VB)
Every time determined by particle counter sample volume, standard cubic meter to indicate the state (standard condition. 0 °C, 1.01 ×
105Pa).
3.3 Particle content
Measured or equal to the total number of particle diameters divided by the sample volume and the resulting value is greater than a predetermined.
3.4 Particle/particle diameter
Equivalent diameter measured by light scattering particle counter to obtain optically.
3.5 Predetermined diameter permissibleparticlesize
Supply and demand sides agreed to a user-specified gas or gas of particulate matter in the largest particle diameter.
4 principle of the method
When light encounters powder particles (obstacle) in the process of moving, will deviate from the original direction of propagation continues to spread, a phenomenon known as light
GB/T 34710.3-2018 | GB/T 34710.2-2018 | GB/T 34710.1-2017 | GB/T 31987-2026 | GB/T 31986-2026 | GB/T 31058-2026 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 26570.1-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 26570.1-2011
$145.00