GB/T 26489-2011Methods for measuring super amphiphilicity of nanomaterials (English PDF)
纳米材料超双亲性能检测方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 26489-2011 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
May 12, 2011
Implementation date
February 1, 2012
Scope
GB/T 26489-2011 is the English-translated version of 纳米材料超双亲性能检测方法.
GB/T 26489-2011 is the Chinese standard "Methods for measuring super amphiphilicity of nanomaterials".
Its scope clause reads: This standard specifies the terms and definitions of nanomaterials over their parents performance testing method, principle of the method, apparatus and reagents, sample preparation, detection Conditions, test procedures and results evaluation, test reports.
This standard applies to detect nano-technology treatment, consisting of uniform, smooth, non-deformation (in the vertical component of the surface tension of the liquid Under) and the performance of each super-parents to a solid surface with isotropic.
This standard does not apply to the measured liquid capable of absorbing material. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 26489-2011
National Standard of the People's Republic of China
- ICS
- 71.040.40
- Classification
- G 04
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 3.1 The contact angle
- 3.2 Hydrophilic
- 3.3 Lipophilic oileophilic
- 3.4 Super parents nanomaterials
1 Scope
This standard specifies the terms and definitions of nanomaterials over their parents performance testing method, principle of the method, apparatus and reagents, sample preparation, detection
Conditions, test procedures and results evaluation, test reports.
This standard applies to detect nano-technology treatment, consisting of uniform, smooth, non-deformation (in the vertical component of the surface tension of the liquid
Under) and the performance of each super-parents to a solid surface with isotropic.
This standard does not apply to the measured liquid capable of absorbing material.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 6682-2008 analytical laboratory use specifications and test methods (ISO 3969. 1987, MOD)
GB/T 19619 nanomaterials term
3 Terms and Definitions
GB/T 19619 and defined by the following terms and definitions apply to this document.
3.1 The contact angle
Liquid drop on a solid surface, solid - liquid - gas-phase at the intersection do gas - liquid interface tangent, this tangent with the solid-liquid boundary line between folders
Angle, shown in Figure 1. Under test, the contact angle of the solid surface with water called the water contact angle, the contact angle of oil called oil contact angle.
Note. Adhesion is the main indicator assessment over parent material.
3.2 Hydrophilic
Performance has affinity for water, wettability. Surface contact angle with water of 90 ° or less hydrophilic.
3.3 Lipophilic oileophilic
The performance of oil has an affinity, wettability. The contact angle of the surface with the oil of less than or equal to 90 ° is lipophilic.
3.4 Super parents nanomaterials
Nano-technology process, the surface having a nanostructure and hydrophilic lipophilic, water contact angle is less than or equal to 5 °, the contact angle of less than oil
Or equal to 5 ° in the material.
Principle 4 4.1 contact angle was used to characterize the extent of the wetting liquid to solid. In degrees, between 0 ° ~ 180 °. For a given system, then
Antennae are specific, depending on the interaction of the three-phase interface (liquid/gas, solid/gas and liquid/solid) between.
GB 31604.35-2016 | GB/T 32055-2015 | GB/T 17519-2013 | GB/T 22461.3-2026 | GB/T 18295-2026 | GB/T 26490-2011 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 26489-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 26489-2011
$85.00